Using The Bypass Tray - Xerox 4118P - WorkCentre B/W Laser User Manual

7

Using the Bypass Tray

The Bypass Tray is located on the right side of your machine. It can be closed when not in use,
making the product more compact. Use the Bypass Tray to print transparencies, labels,
envelopes or postcards in addition to making quick runs of paper types or sizes that are not
currently loaded in the paper tray.
Acceptable print media is plain paper with sizes ranging from 98 x 148 mm (3.86 x 5.83 inch),
to Legal size (216 x 356 mm / 8.5 x 14 inch) and weighing between 60 g/m² and 160 g/m² (16
lb and 43 lb).
The following table summarizes the print media allowed and the maximum stacking height for
each paper type.
Plain/Bond/Colored and Pre-
printed Paper
Envelope
Transparency
Label
Cardstock
Xerox WorkCentre4118 User Guide
To select a paper tray, press the
[Paper Supply] key until the
required tray is lit on the Status
Map.
Tray 1 and the Bypass Tray are
available as standard, Tray 2 is
optional.
If two tray lights display together,
the Auto Tray Switching feature is
active. When one tray runs out of
paper, the machine will switch to
the other selected tray.
PAPER TYPE
The height is measured with the stack of sheets laid on a flat surface.
Status Map
MAXIMUM STACKING HEIGHT
100 sheets or 9 mm (0.35 inch)
10 envelopes or 9 mm (035 inch)
30 sheets or 9 mm (0.35 inch)
10 sheets or 9 mm (0.35 inch)
10 sheets or 9 mm (0.35 inch)
Enter
Paper Supply
Page 4-5