Paper Jams - Xerox 4118P - WorkCentre B/W Laser User Manual

User guide
Hide thumbs Also See for 4118P - WorkCentre B/W Laser:
Table of Contents

Advertisement

Paper Jams

If paper jams occur, 'Paper Jam' displays and the Paper Jam or Paper Tray LED on the Status
Map flashes to indicate the problem area. Follow the steps below to clear the jam. To avoid
tearing paper, pull the jammed paper out gently and slowly.
Paper Feed Area
If the paper jams in the feed area 'Paper Jam 0' displays.
1
2
3
Page 10-6
Pull out the Paper Tray.
When the tray is fully out, lift the
front part of the tray slightly to
release the tray from the
machine.
Remove the jammed paper by
gently pulling it straight out.
Once you remove the jammed
paper, open the side cover and
close it to clear the 'Paper Jam 0'
message from the display.
If there is any resistance and the
paper does not move immediately
when pulled, pull the release
lever to open the side cover.
Carefully remove the misfed
paper in the direction shown.
Xerox WorkCentre 4118 User Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4118x - workcentre b/w laserWorkcentre 4118

Table of Contents