Xerox 4118P - WorkCentre B/W Laser User Manual page 69

Clone
Auto Fit
1-2 Sided 1-1 Sided
Use to produce
1 or 2 sided copy
output from 1
1-2 Sided
sided originals.
Long
1-2 Sided
Short
Collated
Use to produce
collated copy
sets.
Xerox WorkCentre 4118 User Guide
Use to print multiple
images on a single sheet
of paper. The number of
images produced is
determined automatically
based on the original
image size.
Only available using the
Document Glass, ensure
the Document Feeder is
empty.
Use to reduce or enlarge
the image to fit the paper
size automatically.
Only available using the
Document Glass, ensure
the Document Feeder is
empty.
Use when originals are
printed on 1 side and 1-
sided copies are required.
Use when originals are
printed on 1 side only and
2 Sided copies, with the
conventional "head to
head" layout are required.
Use when originals are
printed on 1 side only and
2 Sided copies, with the
"head to toe" layout are
required.
On Use to produce collated
output e.g. 2 copies of a 3
page job will print one
complete document,
followed by the second
complete document.
Press [Copy].
Press [Reduce/Enlarge].
Using the Navigation Keys, select [Clone] and
press [Enter].
Clone displays.
Press [Copy].
Press [Reduce/Enlarge].
Using the Navigation Keys, select [Auto Fit] and
press [Enter].
Auto Fit displays.
Press [Copy].
Press [2 Sided].
Use the Navigation Keys to select the option
required and press [Enter] to save the selection.
If necessary, use the [Scan Side 2] option to scan
side 2. Position side 2 on the Document Glass
and select [Yes] then [Enter] to scan side 2.
Continue the procedure until all the originals have
been scanned.
Select [No] when all the originals have been
scanned, and press [Enter].
Press [Copy].
Press [Collated].
Use the Navigation Keys to select [On] and press
[Enter].
Page 3-7