Xerox 4118P - WorkCentre B/W Laser User Manual page 23

EUROPE
Radio Equipment & Telecommunications Terminal Equipment Directive:
This Xerox product has been self-certified by Xerox for pan-European single terminal
connection to the analogue public switched telephone network (PSTN) in accordance with
Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the following countries:
Austria
Belgium
Denmark
France
Italy
Bulgaria
In the event of problems you should contact your local Xerox representative in the first
instance. This product has been tested to and is compliant with TBR21, a specification for
terminal equipment for use on analogue-switched telephone networks in the European
Economic Area. The product may be configured to be compatible with other country networks.
Please contact your Xerox representative if it needs to be reconnected to another country's
network. There are no user-adjustable settings in the product.
NOTE: Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling, it is
recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and faster call
setup.
Modification of this product, connection to external control software or to external control apparatus not
authorized by Xerox, will invalidate its certification.
Xerox WorkCentre 4118 User Guide
Germany Luxembourg
Greece Netherlands
Iceland Norway
Ireland Portugal
Spain Czech Republic Poland
Romania
Sweden
Switzerland
United Kingdom
Finland
Page 1-15