Fax Forwarding
This feature sets up the forwarding details for faxes. This can be set for received and or
transmitted faxes and can also print a copy at the WorkCentre 4118.
To configure fax forwarding:
Press the [Machine Status] button.
1
Press
2
If the System Admin Tools have been passcode protected, type in the password and press
[Enter].
Press
3
Press
4
The choices are:
Enter the fax number to receive the forwarded fax and press [Enter].
If you want to forward the Fax to another number, press
5
and press [Enter]. Otherwise, choose No and press [Enter].
Enter the fax number to receive the forwarded fax and press [Enter].
If you want to print a local copy, press
6
Otherwise, choose No and press [Enter].
If you want to delete the assigned recipient of the forwarded faxes, press
7
Yes is displayed and press [Enter]. Otherwise, choose No and press [Enter].
Page 5-14
or
until System Admin Tools is displayed and press [Enter].
or
until Forward to Fax is displayed and press [Enter].
or
until the required forwarding condition is displayed and press [Enter].
Off - don't forward
RX - forward received
TX - forward transmitted
All - forward RX and TX
or
or
until Yes is displayed and press [Enter].
Xerox WorkCentre 4118 User Guide
until Yes is displayed
or
until