Chapter 3 Control Panel; Lamps And Switch; Ready (Paper) Lamp - Brother HL-730Plus Service Manual

CHAPTER 3
CONTROL PANEL

LAMPS AND SWITCH

This section refers to the following lamps and switch on the printer control
panel.
Note
When the power switch is off or the printer is in sleep mode, all lamps
including the Ready lamp are off.

Ready (Paper) Lamp

The Ready lamp indicates the current status of the printer.
Lamp
Blinking
Blinking
This lamp also works as the Paper lamp with the Alarm lamp. They blink
simultaneously to indicate a paper error. See
Fig. 3-1 Lamps and Switch on Control Panel
Printer status
The power switch is off or the printer is in sleep
Off
mode. If the printer is in sleep mode, it will wake up
automatically when it receives data or you press the
control panel switch.
The printer is warming up.
(Blinking at 1 second intervals)
The printer is cooling down and stops printing until
the printers internal temperature lower.
(Blinking at 2 seconds intervals)
The printer is ready to print.
On

CHAPTER 3 CONTROL PANEL

"Operator Calls" in Chapter 6.
CHAPTER 3 –1