Port Configuration; Port Information - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Port configuration

Table 22 provides information on ports that the switch uses. When configuring the switch for various
policies, take into consideration firewalls and other devices that may sit between switches in the fabric and
your network or between the managers and the switch.
Table 22

Port information

Port Type
22 TCP
23 TCP
80 TCP
1 1 1 TCP
123 TCP
161 UDP
443 TCP
512 TCP
513 TCP
514 TCP
897 TCP
Common use Comment
SSH
Telnet Use the ipfilter command to block the port.
HTTP Use the ipfilter command to block the port.
sunrpc This port is used by Platform API. Use the ipfilter
command to block the port.
NTP
SNMP Disable the SNMP service on the remote host if you do not
use it, or filter incoming UDP packets going to this port.
HTTPS Use the ipfilter command to block the port.
exec
login
shell
This port is used by the Platform API. Disable this port using
the configure command.
Fabric OS 6.1.x administrator guide 103