Generating An Iscsi Vt For A Specific Fc Target; Manual Iscsi Vt Creation - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Name:
State/Status:

Generating an iSCSI VT for a specific FC target

1. Connect and log in to the switch.
2. Enter the iscsiCfg
iSCSI VT that contains only the storage attached to the specified WWN. The default value of
iqn.2002-12.com.brocade
portion of the IQN.
The following is an example.
switch:admin> iscsicfg --easycreate tgt -w 21:00:00:04:cf:e7:74:cf
IndexFC WWN iSCSIName
21:00:00:04:cf:e7:74:cf
Operation Succeeded
3. Enter the iscsiCfg
The following is an example.
switch:admin> iscsicfg --show tgt
Number of records found: 1
Name: iqn.2002-10.com.brocade:21:00:00:04:cf:e7:74:cf
State/Status:Online/Defined
Auth. Method:None

Manual iSCSI VT creation

Create iSCSI VTs manually when there are FC targets on the fabric that should not be mapped to an iSCSI
VT and if you want to map more than one target to the same iSCSI VT or a LUN to an iSCSI VT. Up to 256
LUNs can be mapped to an iSCSI VT.
1. Connect and log in to the switch.
2. Enter the iscsiCfg
iSCSI VT, that is, an iSCSI VT that contains no LUNs. The <IQN> value is an iSCSI Qualified Name
entered in the form
the default for the
the user defined portion.
Type Date
+--++------++----------++-----------------------+
iqn.2002-12.com.brocade:10:00:00:05:1e:aa:bb:cc
Every iSCSI initiator and iSCSI VT on the same IP network and SAN must have a unique IQN. The
default for the
modifygw -t <tgtname> command. Your organization may suggest or require a specific format
--
for the prefix portion of the IQN. The user defined portion may take any form.
The following is an example.
switch:admin> iscsicfg --create tgt -t iqn.2002-12.com.brocade:example-disk001
The operation completed successfully.
3. Enter the iscsiCfg
VTs.
The following is an example.
switch:admin> iscsicfg --show tgt -t iqn.2002-12.com.brocade:example-disk001 -v
Number of records found: 1
Name: iqn.2002-10.com.brocade.example:disk001
State/Status: Offline/Defined
Auth. Method: None
4. Enter the fcLunQuery command to display a list of connected FC targets and show the LUN
configurations.
iqn.2002-12.com.brocade:2f:ff:00:06:2b:0d:12:9a
Online/Defined
easycreate tgt command with the -w <port WWN> option to create an
--
, is used for the fixed prefix, and the port WWN is used as the user-defined
iqn.2002-10.com.brocade:21:00:00:04:cf:e7:74:cf
show tgt command to display the status of the created iSCSI VTs:
--
create tgt command with the -t <IQN> option to create an undefined
--
type.date.naming authority:<
type.date.naming authority:
Auth User defined
type.date.naming authority:
show tgt command with the -t <IQN> and -v options to verify the iSCSI
--
Status
user_defined . The following is an example, using
>
prefix portion of the IQN, followed by a WWN as
prefix portion may be changed using the iscsiSwCfg
Fabric OS 6.1.x administrator guide 263