Ficon Commands; Fabric Os Commands Related To Ficon And Ficon Cup - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

• The FC4-48 and FC8-48 port blades must not be inserted in slot 10 of the chassis in a FICON
configuration. (Other blades are supported in slot 10, but the FC8-48 and FC4-48 blades are not.) Port
255 is reserved for CUP.

FICON commands

Table 93 summarizes the Fabric OS CLI commands that can be used for managing FICON fabrics. For
detailed information on these commands, see the Fabric OS Command Reference.
Table 93

Fabric OS commands related to FICON and FICON CUP

Command
Standard Fabric OS commands
configure
portSwap
portSwapDisable
portSwapEnable
portSwapShow
Commands specific to FICON
ficonclear rlir
ficonclear rnid
ficonshow ilir
[fabric]
ficonshow lirr
[fabric]
ficonshow rlir
[fabric]
ficonshow rnid
[fabric]
ficonshow
switchrnid [fabric]
Commands specific to FICON CUP:
ficoncupset fmsmode Sets FICON Management Server mode on or off for the switch.
ficoncupset modereg Sets the mode register bits for the switch.
ficoncupshow
fmsmode
ficoncupshow
modereg
NOTE: The Fabric OS CLI supports only a subset of the management features for FICON fabrics. The full
set of FICON CUP administrative procedures is available using the Fabric Manager and Web Tools
software features. You can also use an SNMP agent and the FICON Management Information Base (MIB).
For information on these tools, see:
• Web Tools—Web Tools Administrator's Guide
• Fabric Manager—Fabric Manager Administrator's Guide
• SNMP Agent and FICON Management Information Base (MIB)—Fabric OS MIB Reference
Description
Sets the Domain ID and the insistent Domain ID mode.
Swaps ports.
Disables the portSwap command.
Enables the portSwap command.
Displays information about swapped ports.
Removes all RLIR records from the local RLIR database.
Removes all outdated RNID records from the local RNID database.
Displays FRU failure information on the local switch or on the fabric.
Displays registered listeners for link incidents for the local switch or for
the fabric.
Displays link incidents for the local switch or for the fabric.
Displays node identification data for all devices registered with the local
switch or all devices registered with all switches defined in the fabric.
Displays node identification data for the local switch or for the fabric.
Displays the FICON Management Server mode setting for the switch.
Displays the mode register bit settings for the switch.
Fabric OS 6.1.x administrator guide 417