HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 191

maintain the same firmware level on both partitions of each CP within the Director. The command
firmwareShow -v will display the firmware version on the Co-CPs.
BrcdDCXBB:admin> firmwareshow -v
Slot Name Appl
------------------------------------------------------------------------
6 CP0 FOS
Co-FOS
7 CP1 FOS
Co-FOS
* Local CP
firmwareDownloadStatus
Displays an event log that records the progress and status of events during firmwareDownload. The event
log is created by the current firmwareDownload command and is kept until another
firmwareDownload command is issued. When downloading Fabric OS, the event logs in the two CPs
are synchronized. This command can be run from either CP.
nsShow
Displays all devices directly connected to the switch that have logged into the name server. Make sure the
number of attached devices after the firmware download is exactly the same as the number of attached
devices prior to the firmware download.
nsAllShow
Displays all connected devices to a fabric. Make sure the number of attached devices after the firmware
download is exactly the same as the number of attached devices prior to the firmware download.
fabricShow
Displays all switches in a fabric. Make sure the number of switches in the fabric after the firmware
download is exactly the same as the number of attached devices prior to the firmware download.
Primary/Secondary Versions
v6.1.0
v6.1.0
v6.1.0
v6.1.0
v6.1.0
v6.1.0
v6.1.0
v6.1.0
Status
ACTIVE *
STANDBY
Fabric OS 6.1.x administrator guide 191