Displaying Ficon Emulation Configuration Values; Ficon Emulation Modify Operations - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Displaying FICON emulation configuration values

You can display the values configured for FICON emulation by using the portShow ficon command.
The following example shows FICON emulation configuration values for port ge1.
Sprint108:root> portshow ficon ge1 all
Port: ge1
VE_STATUS
TunnelId vePort vePortStatus veFeatureBitMap veHashEntryCount
0 24
1 ff
2 ff
3 ff
4 ff
5 ff
6 ff
7 ff
FEATURES
TunnelId XRC
0 ON
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
PARAMETERS
TunnelId WrtPipe RdPipe WrtDevs RdDevs WrtTimer WrtChain OxidBase DebugFlags
0 032
1 000
2 000
3 000
4 000
5 000
6 000
7 000

FICON emulation modify operations

Following is the syntax for the portcfg ficon modify command:
portCfg ficon [slot/]ge0|ge1 tunnel_Id modify [-x 1|0] [-w 1|0] [-r 1|0] [-t
1|0] [-l 1|0] [-b 1|0] [wrtMaxPipe value] [rdMaxPipe value] [wrtMaxDevs
value] [rdMaxDevs value]
[wrtTimer value] [wrtMaxChains value] [oxidBase value] [dbgFlags value]
[xrcErr] [LrcCheck]
where:
slot
ge0|ge1
tunnel_id
modify
The following options turn features on and off. The associates tunnels must be disabled to modify the option
settings. If you attempt to do them on an enabled tunnel, the operation is not allowed, and you are
prompted to disable the tunnel.
-x 1|0
-w 1|0
-r 1|0
UP 1
DOWN 0
DOWN 0
DOWN 0
DOWN 0
DOWN 0
DOWN 0
DOWN 0
TapeWrt TapeRd TinTir
ON ON ON
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
032 16 16
000 00 00
000 00 00
000 00 00
000 00 00
000 00 00
000 00 00
000 00 00
The number of a slot in a 4/256 SAN Directoe or DC Director chassis that contains an
FC4-18i blade. This parameter does not apply to the stand-alone 400 MP Router.
The Ethernet port used by the tunnel (ge0 or Ge1).
The tunnel number (0 - 7).
The modify option changes the FICON emulation configuration options and parameters.
Enables or disables XRC emulation. 1 is enable, O is disable.
Enables or disables tape write pipelining. 1 is enable, O is disable.
Enables or disables tape read pipelining. 1 is enable, O is disable.
2
0
0
0
0
0
0
0
DvcLack RdBlkId
ON OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
0300 3000000 0x7000
0000 0000000 0x0000
0000 0000000 0x0000
0000 0000000 0x0000
0000 0000000 0x0000
0000 0000000 0x0000
0000 0000000 0x0000
0000 0000000 0x0000
Fabric OS 6.1.x administrator guide 439
0xffc80000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000
0x00000000