Table of Contents
Advertisement
Related Topics
Grounding the J-SRX240 Services Gateway
Chapter 11: Connecting, Grounding, and Powering On the J-SRX240 Services Gateway
Arrange network cables as follows to prevent them from dislodging or developing stress
points:
Secure cables so that they are not supporting their own weight as they hang to the
floor.
Place excess cable out of the way in neatly coiled loops.
Use fasteners to maintain the shape of cable loops.
Installing the J-SRX240 Services Gateway on page 52
Grounding the J-SRX240 Services Gateway on page 57
Connecting the J-SRX240 Services Gateway to the Power Supply on page 55
Powering On and Powering Off the J-SRX240 Services Gateway on page 59
To meet safety and electromagnetic interference (EMI) requirements and to ensure
proper operation, you must adequately ground the J-SRX240 Services Gateway before
connecting power.
Figure 12 on page 57 shows the J-SRX240 Services Gateway grounding point.
Figure 12: Grounding the J-SRX240 Services Gateway
You ground the device by connecting a grounding cable to earth ground and then attaching
it to the chassis grounding point using one 6–32 UNC screw.
CAUTION: Before you install the device, a licensed electrician must attach a cable lug
to the grounding and power cables that you supply. A cable with an incorrectly attached
lug can damage the device (for example, by causing a short circuit).
57
Advertisement
Table of Contents
