Table of Contents
Advertisement
PowerConnect J-SRX240 Services Gateway Hardware Guide
Table 39: Grounding Cable Specifications for the Services Gateway
Grounding Requirement
Grounding cable
Amperage of grounding cable
Grounding lug
Related Topics
126
WARNING: Before device installation begins, a licensed electrician must attach a cable
lug to the grounding and power cables that you supply. A cable with an incorrectly
attached lug can damage the device (for example, by causing a short circuit).
To ground the device before connecting power, you connect the grounding cable to earth
ground and then attach the lug on the cable to the chassis grounding point with the
screw.
Table 39 on page 126 lists the specifications of the grounding cable used with the device.
J-SRX240 Services Gateway Site Electrical Wiring Guidelines on page 123
Grounding the J-SRX240 Services Gateway on page 57
J-SRX240 Services Gateway Power Specifications and Requirements on page 124
J-SRX240 Services Gateway Power Supply on page 20
Specification
14 AWG single-strand wire cable
Up to 25 A
Ring-type, vinyl-insulated TV14-6R lug or equivalent
Advertisement
Table of Contents
