Configuring Basic System Properties - Dell PowerConnect J-SRX100 Hardware Manual

PowerConnect J-SRX100 Services Gateway Hardware Guide

Configuring Basic System Properties

78
NOTE: All network and management access settings are optional.
Click Apply to apply the configuration.
6.
NOTE: After configuring the basic settings, the Web session may timeout.
Refresh or relaunch the page if the applied configuration page is not
displayed .
Table 26 on page 78 through Table 28 on page 79 provide the summary of configuration
details for initial setup.
Table 26: Basic Configuration Summary (Device Identification)
Field Function
Host Name Defines the hostname of the
services gateway.
Domain Name Defines the network or subnetwork
that the services gateway belongs
to.
Root Password Sets the password that user
(required) can use to log in to the services
gateway.
Verify Root Verifies the root password has been
Password typed correctly.
(required)
DNS Name Specifies a DNS server that the
Servers services gateway can use to resolve
hostnames into addresses.
Domain Search Adds each domain name that
includes the services gateway to
the configuration so that each
domain is included in a DNS search.
Your Action
Type the hostname.
Type the domain name.
root Type a plaintext password that the
system encrypts.
NOTE: After a root password has been
defined, it is required when you log in to
the J-Web user interface or the CLI.
Retype the password.
Add an IP address by selecting it in the
box to the left of the Add button, then
clicking Add.
Delete an IP address by clicking it in the
box above the Add button, then clicking
Remove.
Add a domain name by typing it in the
box to the left of the Add button, then
clicking Add.
Delete a domain name by , clicking it in
the box above the Add button, then
clicking Remove.