Dell PowerConnect J-SRX100 Hardware Manual page 104

PowerConnect J-SRX100 Services Gateway Hardware Guide
90
Table 30: Services Gateway LED Status on Startup (continued)
LED
Power LED
HA LED
The LEDs available on the services gateway display the status of various components.
Table 31 on page 90 describes the LEDs.
Table 31: Component LEDs on the Services Gateway
LED State
Status LED Green
Amber
Red
Alarm LED Red
Amber
Off
State
Green
Off
Meaning
Indicates that the device is
functioning normally.
Indicates that the device
is starting up.
Indicates that the Reset
Config button is pressed.
Indicates that an error is
detected in the device.
Indicates a major alarm.
Indicates a minor alarm.
Indicates that there are
currently no alarms.
Description
Indicates that the device is receiving
normal power supply.
Indicates that the device is not part of
chassis clustering set up.
Possible Causes and
Corrective Actions
Normal condition. No action
is required.
Normal condition. No action
is required.
Contact Dell Support. See
"Dell Support" on page 95.
Major alarm indicates a
critical situation on the
services gateway that
requires immediate action.
See "Monitoring the
J-SRX100 Services
Gateway Using Chassis
Alarm Conditions" on
page 91.
Minor alarm condition
requires monitoring or
maintenance. If left
unchecked, it might cause
an interruption in service or
degradation in
performance. See
"Monitoring the J-SRX100
Services Gateway Using
Chassis Alarm Conditions"
on page 91.
Normal condition. No action
is required.