Packing The J-Srx100 Services Gateway And Components For Shipment - Dell PowerConnect J-SRX100 Hardware Manual

PowerConnect J-SRX100 Services Gateway Hardware Guide
Related
Documentation

Packing the J-SRX100 Services Gateway and Components for Shipment

136
FPC 0
PIC 0
Power Supply 0
J-SRX100 Services Gateway Chassis Serial Number and Agency Labels
The J-SRX100 Services Gateway has a serial number ID and agency labels on the bottom
of the chassis as shown in Figure 22 on page 136.
Figure 22: Location of J-SRX100 Services Gateway Serial Number and
Agency Labels
J-SRX100
Contacting Dell on page 135
This section describes how to pack the services gateway or components for shipment.
Packing the Services Gateway for Shipment
To pack the services gateway for shipment:
Retrieve the shipping carton and packing materials in which the device was originally
1.
shipped. If you do not have these materials, contact your customer representative
about approved packaging materials.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect
2.
the strap to the ESD point on the chassis or to an outside ESD point if the device is
disconnected from earth ground.
FPC
8x FE Base PIC