Inaccessible; Using The Reset Config Button On The J-Srx100 Services Gateway; Changing The Reset Config Button Behavior On The J-Srx100 Services; Gateway - Dell PowerConnect J-SRX100 Hardware Manual

Related
Documentation
Resetting the Configuration File When the J-SRX100 Services Gateway Is Inaccessible

Using the Reset Config Button on the J-SRX100 Services Gateway

Table 33 on page 93 describes different Power LED status settings and their corrective
actions.
Table 33: Services Gateway Power LED Status
LED Status
Green
Amber
Off
Monitoring the J-SRX100 Services Gateway Chassis Using the CLI on page 87
Monitoring the J-SRX100 Services Gateway Components Using LEDs on page 89
Monitoring the J-SRX100 Services Gateway Using Chassis Alarm Conditions on page 91
Using the Reset Config Button on the J-SRX100 Services Gateway on page 93
Changing the Reset Config Button Behavior on the J-SRX100 Services Gateway on
page 94
Dell Support on page 95
This topic includes the following sections:
Using the Reset Config Button on the J-SRX100 Services Gateway on page 93

Changing the Reset Config Button Behavior on the J-SRX100 Services

Gateway on page 94
If a configuration fails or denies management access to the services gateway, you can
use the Reset Config button to restore the device to the factory default configuration or
Chapter 15: Monitoring the J-SRX100 Services Gateway
Meaning
Device is receiving power,
and the internal power
supply is functional.
Indicates that the power
button has been pressed
and quickly released.
Indicates that the device
is not receiving power.
Possible Cause and Corrective
Action
Normal indication. No action is required.
Normal indication. No action is required.
Verify that the AC power cord from
the power source to the device is not
damaged. If the insulation is cracked
or broken, immediately replace the
cord or cable.
Ensure that the socket you plug in is
in working condition.
Ensure the device has an AC input
voltage between 100 and 240 VAC.
If you cannot determine the cause
of the problem or need additional
assistance, see "Dell Support" on
page 95.
93