Accessing The J-Srx100 Services Gateway - Dell PowerConnect J-SRX100 Hardware Manual

PowerConnect J-SRX100 Services Gateway Hardware Guide

Accessing the J-SRX100 Services Gateway

Related
Documentation
4
Table 3: J-SRX100 Services Gateway Models
Product Name
J-SRX100 Services Gateway
J-SRX100 Services Gateway
J-SRX100 Services Gateway
J-SRX100 Services Gateway
NOTE: You can upgrade from a J-SRX100 Services Gateway Low Memory
version to a High Memory version through a license key. You need not order
a separate High Memory device.
All J-SRX100 Services Gateways run the Junos OS.
Two user interfaces are available for monitoring, configuring, troubleshooting, and
managing the J-SRX100 Services Gateway:
J-Web interface: Web-based graphical interface that allows you to operate a services
gateway without commands. The J-Web interface provides access to all JUNOS
functionality and features.
JUNOS command-line interface (CLI): Command shell that runs on top of a UNIX-based
operating system kernel. The CLI is a straightforward command interface. On a single
line, you type commands that are executed when you press the Enter key. The CLI
provides command Help and command completion.
J-SRX100 Services Gateway Specifications on page 7
J-SRX100 Services Gateway Features and Functions on page 5
Upgrading the J-SRX100 Services Gateway Low Memory Version to a High Memory
Version on page 59
Device Type
Low Memory
High Memory
High Memory
NOTE: The J-SRX100S model
supports up to 20 users, 4,000
firewall sessions, and 20 IPsec
tunnels.
High Memory
NOTE: The J-SRX100SU model
supports an unlimited number
of users, 32,000 firewall
sessions, and 128 IPsec tunnels.
Model Number
J-SRX100B
J-SRX100H
J-SRX100S
J-SRX100SU