Table of Contents
Advertisement
Setting up your operating system
CAUTION: To prevent operating system corruption from sudden power loss, use the operating system to gracefully shut
down the Edge Gateway.
Windows 10 IoT Enterprise LTSB
Overview
The Edge Gateway supports both Windows 10 IoT Enterprise LTSB 2015 and Windows 10 IoT Enterprise LTSB 2016 editions. For
more information on Windows 10 operating system, see https://support.microsoft.com/en-us.
Boot up and log in
1.
Connect a keyboard, mouse, and monitor to the Edge Gateway.
2.
Power on the Edge Gateway.
The system boots to the Windows 10 IoT Enterprise LTSB operating system.
3.
Select your regional settings.
NOTE: If prompted for a product key, and one is already entered, select Do this later.
4.
Read and Agree to the End User License Agreement.
5.
Connect to an available wireless or wired network.
6.
Create a user account.
Restoring Windows 10 IoT Enterprise LTSB
You can restore Windows 10 IoT Enterprise LTSB on the Edge Gateway using the recovery Operating System image on the boot
partition which resets the run-time image back to the factory image.
1.
Connect a keyboard, mouse, and monitor to the Edge Gateway.
2.
Power on the Edge Gateway and boot to the operating system's desktop.
3.
Click the Start icon, hold the Shift key and click Restart.
4.
Select Troubleshoot → Reset this PC.
5.
Select Reset this PC → Remove everything.
6.
Select Fully clean the drive → Reset.
Windows 10 IoT Enterprise LTSB basic functions
BIOS update
BIOS updates for the Edge Gateway may be downloaded from www.dell.com/support. The download includes an executable that
can run from a local machine.
Watchdog Timer
The Watchdog Timer for Windows 10 IoT Enterprise LTSB is controlled from the BIOS setting.
1.
Enter the BIOS during boot by pressing F2.
2.
Access BIOS setting Watchdog Timer to enable or disable The Watchdog Timer.
30
4
Advertisement
Table of Contents
