Initial Setting - Canon VC-C50i/VC-C50iR Programmer's Manual

16.2 Initial Setting

In case of power ON, it is necessary to pedestal initialize at first.
In case of using date and time, it is necessary to set the present time and date.
Host
Corresponding Frame Code
(1) FF 30 30 00 86 30 EF
(2) FE 30 30 30 30 33 30 30 31 30 EF
(3) FF 30 30 00 58 30 EF
(4) FE 30 30 30 30 EF
(5) FF 30 30 00 91 33 30 30 30 31 30 32 EF
(6) FE 30 30 30 30 EF
(7) FF 30 30 00 91 35 31 32 33 34 35 36 EF
(8) FE 30 30 30 30 EF
(9) FF 30 30 00 86 30 EF
(10) FE 30 30 30 30 30 30 30 30 30 EF
(1) System Control Command
Extended operation status request
(2) Answer (ACK + Status)
(3) Pedestal Control Command
Pedestal Initialize 1
(4) Answer (ACK)
(5) System Control Command
Date Setting (00 year 01 month 02 day)
(6) Answer
(7) System Control Command
Time Setting (12 hour 34 minute 56 second)
(8) Answer
(9) System Control Command
Extended Operation Status Request
(10) Answer (ACK + Status)
Command/Answer
188
VC-C50i
Start Initialize
Stop Initialize