14.16 Operation Status 3 Request; System Control Command Type 1 - Canon VC-C50i/VC-C50iR Programmer's Manual

14.16 Operation Status 3 Request

Function Returns operation status 3.
Command 0086h
Parameter 1h
Status Length
Value
Reference The following statuses are indicated when each bit in the status is 1.
•The b0, b1 information is identical to the information in 14-15. Extended
Operation Status Request (b16, b17).
Format of Control Code
d0 d1
Header Device Num
FFh 30h
4 byte
Based on the operation status (16 bit) value indicating the
internal status.
(MSB)
b15 Not used (undetermined value)
b14 Not used (undetermined value)
b13 Not used (undetermined value)
b12 Not used (undetermined value)
b11 Not used (undetermined value)
b10 Not used (undetermined value)
b9 Not used (undetermined value)
b8 Not used (undetermined value)
b7 Displayed on screen (central control)
b6 Displayed as user text
b5, 4 Displayed date
b3, 2 Displayed time b3
b1 Date setting completed
b0 Time setting completed 0 :Not set 1: Setting completed
(LSB)
d2 d3 d4
Command
3Xh 00h 86h

System Control Command Type 1

b5 b4
0 0 : off
0 1 : Displayed as style 1
1 0 : Displayed as style 2
b2
0 0 : off
0 1 : Displayed as style 1
1 0 : Displayed as style 2
0: Not set 1: Setting completed
d5 d6
Parameter End mark
31h EFh
146
0: off, 1: on
0: off, 1: on