14.38 Turning On Time Request; System Control Command Type 1 - Canon VC-C50i/VC-C50iR Programmer's Manual

14.38 Turning ON Time Request

Function To request total accumulated turn ON time.
Command 0092h
Parameter Length
Value
Status Length
Range
Reference •Camera accumulated turn ON time calculates total camera turn ON time in
one hour as one unit.
•Pedestal accumulated turn ON time calculates total power on time in one
hour as one unit.
Format of Control Code
d0 d1
Header Device Num
FFh 30h
Request of total turn on time (0:camera section/1:pedestal section) indicates in
ASCII code 1 byte.
Example: to request total accumulated time of pedestal section
Answer Format
In case of No Error
d0 d1
Header Device Num
FEh 30h
Total accumulated turn on time indicates in hexadecimal 4 figures and
status value is its ASCII code.
Example:
573 hours
In case of Error
d0 d1
Header Device Num
FEh 30h
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example:
In case of Parameter Error :
In case of Mode Error :
Condition of Error flag to be set
Parameter Error •In case of assigned parameter illegal.
Mode Error
1 byte
0h: accumulated turn ON time of camera section
1h: accumulated turn ON time of pedestal section
4 byte
0000h~FFFFh
d2 d3
Command
3Xh 00h
p0
⇒
01h 31h
d2 d3 d4
Error Code
3Xh 30h 30h
⇒ 023Dh ⇒
d2 d3
Error Code
3Xh e0
01010000B ⇒ 50h ⇒ 35h 30h
10010000B ⇒ 90h ⇒ 39h 30h
•Not in status of Camera ON.
•Not in status of Host Control Mode.

System Control Command Type 1

d4 d5
Parameter
92h p0
⇓
d5 d6
Status
s0 s1
⇓
s0 s1
30h 32h
d4 d5
End mark
e1 EFh
⇓
175
d6
End mark
EFh
d7 d8
End mark
s2 s3
s2 s3
33h 44h
e0 e1
d9
EFh