13.47 Fade Hi Speed White; Camera Control Command Type 2 - Canon VC-C50i/VC-C50iR Programmer's Manual

13.47 Fade Hi Speed White

Function To fade in white with Hi speed.
Command 00A9h
Parameter Length
Value
Status None
Reference •To change operation by receiving command, even though executing another
fade related command.
•To return notification at the moment of setting command termination
notification ON, when operation terminates. But return only notification of
last executed command, in case of executing another fade command during
operation.
Format of Control Code
d0 d1
Header Device Num
FFh 30h
Answer Format
d0 d1
Header Device Num
FEh 30h
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example:
In case of No Error :
In case of Busy :
In case of Mode Error :
Condition of Error flag to be set
Busy
Mode Error
1 byte
2h
d2 d3
Command
3Xh 00h
d2 d3
Error Code
3Xh e0
00000000B ⇒ 00h ⇒ 30h 30h
00010000B ⇒ 10h ⇒ 31h 30h
10010000B ⇒ 90h ⇒ 39h 30h
•In process of camera initializing operation by Camera Reset
command, etc.
•In case of executing Preset Move command.
•Not in status of Camera ON.
•Not in status of Host Control Mode.

Camera Control Command Type 2

d4 d5
Parameter
A9h 32h
d4 d5
End mark
e1 EFh
⇓
111
d6
End mark
EFh
e0 e1