13.40 Auto White Balance Normal; Camera Control Command Type 1 - Canon VC-C50i/VC-C50iR Programmer's Manual

13.40 Auto White Balance Normal

Function To set auto white balance.
Command 00A7h
Parameter Length
Value
Status None
Reference •To adjust white balance automatically.
•To set in default value at the moment of Camera Reset command,
Camera ON command and power ON.
Format of Control Code
d0 d1
Header Device Num
FFh 30h
Answer Format
d0 d1
Header Device Num
FEh 30h
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example:
In case of No Error :
In case of Busy :
In case of Mode Error :
Condition of Error flag to be set
Busy
Mode Error
1 byte
0h
d2 d3
Command
3Xh 00h
d2 d3
Error Code
3Xh e0
00000000B ⇒ 00h ⇒ 30h 30h
00010000B ⇒ 10h ⇒ 31h 30h
10010000B ⇒ 90h ⇒ 39h 30h
•In process of camera initializing operation by Camera Reset
command, etc.
•In case of executing Preset Move command.
•Not in status of Camera ON.
•Not in status of Host Control Mode.
•In the case of not inserted Ir cut-off filter.
•In the case of the low-speed shutter.

Camera Control Command Type 1

d4 d5
Parameter
A7h 30h
d4 d5
End mark
e1 EFh
⇓
104
d6
End mark
EFh
e0 e1