Connect-To Dialog Box; Comn Dialog Box (Com1 Or Com2) - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Connect-To Dialog Box

Figure 3-31
g. Ensure the Connect using field displays COM1 or COM2
(depending on the serial communication port connection to the
switch), and click OK. The COMn dialog box displays (where n is
1 or 2).

COMn Dialog Box (COM1 or COM2)

Figure 3-32
h. Configure the Port Settings parameters as follows:
MAP 0400: Loss of Console Communication
Diagnostics
3
3-65