Chapter 3 Diagnostics; Maintenance Analysis Procedures; Factory Defaults - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Maintenance Analysis Procedures

Factory Defaults

This chapter describes diagnostic procedures used by service
representatives to isolate Sphereon 3032/3232 Switch problems or
failures to the field-replaceable unit (FRU) level. The chapter
specifically describes how to perform maintenance analysis
procedures (MAPs).
The MAPs provide fault isolation and related service procedures.
They are step-by-step procedures that prompt service personnel for
information and describe a maintenance action. The provide
information to interpret system events, isolate a switch failure to a
single FRU, remove and replace the failed FRU, and verify switch
operation.
Table 3-1 lists the defaults for the passwords, and IP, subnet, and
gateway addresses.
Table 3-1 Factory-Set Defaults
Item
Customer password
Maintenance password
IP address
Default
password
level-2
10.1.1.10
3
Diagnostics
Diagnostics
3-1