Installation Tasks
2
Configure and
Enable Call-Home
Event Notification
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
2-94
Configure Ethernet Events Dialog Box
Figure 2-76
3. Click the Enable Ethernet Events check box. A check mark appears
in the check box to indicate Ethernet events are enabled.
4. At the Ethernet Timeout field, type a value between 10 through 120
minutes.
5. Click OK to close the dialog box.
Telephone numbers and other information for the call-home feature
are configured through the Windows 2000 dial-up networking
application. Refer to
for configuration instructions. Refer to
(Optional)
on page 2-102 for instructions on testing this notification
feature.
NOTE: The call-home feature may not be available if the EFC Management
applications (EFCM Lite) is installed on a customer-supplied platform.
1. Close the Hardware View and return to the Products View by
clicking close (X) at the upper right corner of the window.
2. Select Configure Call Home Event Notification from the Maintenance
menu. The Configure Call Home Event Notification dialog box
displays
Configure Call Home Event Notification Dialog Box
Figure 2-77
Task 11: Configure the Call-Home Feature (Optional)
(Figure
2-77).
Task 23: Test Remote Notification