Bytes 8 Through 11 Failure Reasons And Actions - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Diagnostics
3
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
3-106
Did the corrective action solve the problem and relieve the reported
low BB_Credit condition?
NO YES
The ISL appears operational. Exit MAP.
Contact the next level of support. Exit MAP.
25
A 150 event code indicates a zone merge process failed during ISL
initialization. Either an incompatible zone set was detected or a
problem occurred during delivery of a zone merge frame. This event
code always precedes a 070 event code, and represents the reply of
an adjacent fabric element in response to a zone merge frame.
Obtain supplementary event data for each 150 event code.
a. At the Hardware View, click Logs and select Event Log. The
Event Log displays.
b. Examine the first 12 bytes (0 through 11) of event data.
c. Bytes 0 through 3 specify the E_Port number (00 through 23)
reporting the problem. Bytes 8 through 11 specify the failure
reason as specified in
Table 3-6

Bytes 8 through 11 Failure Reasons and Actions

Bytes 8 - 11 Failure Reason
01 Invalid data length.
08 Invalid zone set format.
09 Invalid data.
0A Cannot merge.
F0 Retry limit reached.
F1 Invalid response length.
F2 Invalid response code.
26
A zone merge process failed during ISL initialization. The following list
explains the reason:
Table 3-6 on page 3-106.
Action
Go to step 26.
Go to step 26.
Go to step 27.
Go to step 27.
Go to step 26.
Go to step 26.
Go to step 26.