Createhostvolume - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

• Values for the following properties can be specified in the CreateDrGroupFromHostVolume
command. These properties can be changed later, in another job, by using the commands shown.
Property
Auto suspend on links
down mode
Maximum log disk size
Name (of DR group)
* The name of the source DR group is specified in the CreateDrGroupFromHostVolume command. By default
the name for the destination DR group is the same as the source.
• Values for the following properties cannot be specified in the CreateDrGroupFromHostVolume
command. These properties can be changed in the same job, or in another job, by using the
commands shown.
Property
Comment
Destination access mode
Failsafe mode
(failsafe on unavailable member)
Failsafe on link-down/power-up
Home
I/O mode (write mode)
Suspension mode
• After a DR group pair is created, you can add more virtual disks. See AddDrGroupMember.
• When a job is run, some job arguments may specify features that are not available on the
target array.
• See resource names and UNC

CreateHostVolume

Creates a new host volume by presenting replicated storage to an enabled host. The replicated storage
must be created in a prior host volume replication step in the same job.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
CreateHostVolume ( %src_hostvol_unc%, %storvol_snap_list%, %target_host% )
Source UNC Host Volume (%src_hostvol_unc%). Select or enter the UNC name of a host volume that has
been previously replicated within the job.
Storage Volume List (%storvol_snap_list%). Select the variable assigned to the previous replication
in the job.
Target Host (%target_host%). Select or enter the name or IP address of the enabled host on which the
host volume is to be created.
98
Job concepts, templates and commands
Default values
Source Destination
False (disabled) False (disabled)
0 (no max) 0 (no max)
* *
Default values
Source Destination
blank blank
None (no I/O) None (no I/O)
Disabled Disabled
Enabled Enabled
True
False
Synchronous Synchronous
Resumed Resumed
formats.
Job command
SetDrGroupAutoSuspend
SetDrGroupMaxLogSize
SetDrGroupName
Job command
SetDrGroupComments
SetDrGroupDestinationAccess
SetDrGroupFailsafe
SetDrGroupFailsafeOnLinkDow
nPowerUp
SetDrGroupHome
SetDrGroupIoMode
SetDrGroupSuspend