Unmountentirevolumegroup - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

cancelled
executing
Examples
TestJobState ( "daily_backup-1", EXECUTING )
Comments
• Associated validation commands. None.
• Agent and license prerequisitesNone.
• Command result value. None. For a complete list, see
• OS specifics. None.

UnmountEntireVolumeGroup

Instructs an enabled host to unmount all of the logical volumes in a host volume group.
The host OS removes the logical volume mount points, but the underlying storage volumes remain
presented to the host
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
UnmountEntireVolumeGroup ( %vg_name_unc% )
UNC Volume Group Name (%vg_name_unc%). Select or enter the UNC name of the volume group
whose logical volumes are to be unmounted.
Examples
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Comments
• Associated validation commands.
• Agent and license prerequisites. Requires a host agent.
• Command result value. None. For a complete list, see
• OS specifics. Yes. See examples above.
OpenVMS. OpenVMS does not support volume groups. This command is not applicable to
OpenVMS volume sets.
Windows. Windows does not support volume groups.
• See resource names and UNC
180
Job concepts, templates and commands
failed stopped
success
paused
UnmountEntireVolumeGroup ( "\\HostA2"\cats_vg" )
UnmountEntireVolumeGroup ( "\\HostA2"\cats_vg" )
UnmountEntireVolumeGroup ( "\\HostA2"\cats_vg" )
Not applicable
UnmountEntireVolumeGroup ( "\\HostA2"\cats_vg" )
UnmountEntireVolumeGroup ( "\\HostA2\dom01" )
Not applicable
ValidateHost
formats.
command result values.
command result values.