HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual page 94

CreateContainersForHostVolumeGroup ( %hostvolgroup_unc_name%, %managed_set_name% )
UNC Host Volume Group Name (%hostvolgroup_unc_name%). Select or enter the UNC name of the host
volume group for which the storage containers are to be created.
Managed Set Name (%managed_set_name%). Select or enter a name for the managed set in which the
storage containers are to be added.
Examples
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Comments
• Associated validation commands. None.
• Agent and license prerequisites. Requires a host agent.
• Command result value. Managed set name of virtual disk containers. For a complete list, see
command result
• OS specifics. Yes. See examples above.
• See resource names and UNC
CreateDiskDevice
Instructs an enabled host to create a raw host volume (disk device) from a storage volume (virtual disk).
The storage volume (virtual disk) is presented to the enabled host and a host bus scan is performed to
identify the presented storage.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
CreateDiskDevice ( %storvol_unc_name%, %host_name%, 0, READ_WRITE )
Virtual Disk Name (%storvol_unc_name%). Select or enter the UNC name of the storage volume to be
presented to the host.
Host Name (%host_name%). Select or enter the name or IP address of the host to which the storage
volume is to be presented.
LUN Number. Select or enter a host LUN for the presented storage volume. The LUN cannot already be
in use when the job is run.
Access Type. Select or enter the type of host I/O to allow with the presented storage volume. Choices are
none, read, and read_write.
Examples
CreateDiskDevice ( "\\ArrayA2\Cats", "HostA2", 12, READ_WRITE )
94
Job concepts, templates and commands
CreateContainersForHostVolumeGroup ( "\\HostA2\/home/cats_vg", "hvol_cats" )
CreateContainersForHostVolumeGroup ( "\\HostA2\/users/cats_vg", "hvol_cats" )
CreateContainersForHostVolumeGroup ( "\\HostA2\/var/cats_vg", "hvol_cats" )
Not applicable
CreateContainersForHostVolumeGroup ( "\\HostA2\/usr/cats_vg", "hvol_cats" )
CreateContainersForHostVolumeGroup ( "\\HostA2\dom01#fset1", "hvol_cats" )
Not applicable
values.
formats.