Perform Planned Failover (Template) - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual
Job command reference
Hide thumbs
Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
- User manual (462 pages) ,
- Maintenance and service manual (63 pages) ,
- Firmware release notes (10 pages)
Table of Contents
Advertisement
Perform planned failover (template)
Template summary
Performs a failover of two sites in the case where the source site resources and link remain available.he
DR group pair contains one storage volume (virtual disk) at the source and destination sites.
A.
Stops an application on the enabled host at site 1 (if necessary).
B.
Unmounts the host volume on the enabled host at site 1.
C.
Performs a failover from site 1 to site 2.
D.
Discovers the host volume at site 2
E.
Mounts host volume on the enabled host at site 2.
F.
Starts applications on enabled host at site 2.
Guidelines apply.
Template options
•
Include e-mail notification. Adds a command for e-mail notification of the job instance status.
See SetNotificationPolicy.
Comments
•
Guidelines apply.
Example
This template was generated to perform one iteration of a planned failover of a DR group pair that
contains one virtual disk. No template option was selected.
46
Job concepts, templates and commands
Advertisement
Table of Contents
Need help?
Do you have a question about the 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure and is the answer not in the manual?
Questions and answers