Setdrgroupname; Setdrgroupsuspend - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetDrGroupMaxLogSize ( %drgroup_unc_name%, 0 )
UNC Disk Group Name ( %drgroup_unc_name%). Select or enter the UNC name of the DR group
whose maximum log disk size is to be set.
Max Size (MB). Enter the maximum size (GB). Accept or enter zero (0) to allow the controller software to
apply a default size. The minimum size is 136 MB.
Examples
SetDrGroupMaxLogSize ( "\\ArrayA2\DrGrpPets", 10 )
Comments
• Associated validation commands. None
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see
• OS specifics. None
• See resource names and UNC

SetDrGroupName

Specifies the name of a source or destination DR group.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetDrGroupName ( %drgroup_unc_name%, %name% )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the DR group to
be changed.
Name (%name%). Enter the new name for the DR group.
Examples
SetDrGroupName ( "\\ArrayA2\DrGrpPets", "BigCats" )
Comments
• Associated validation commands. None
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see
• OS specifics. None
• See resource names and UNC

SetDrGroupSuspend

Suspends or resumes remote replication in a DR group pair.
146
Job concepts, templates and commands
command result
formats.
command result
formats.
values.
values.