Examples
SetStorageVolumesWriteCacheMode ( ("\\ArrayA2\Cats", "\\ArrayA2\Dogs"), WRITE_CACHE_ENABLED,
NOWAIT )
Comments
•
Associated validation commands.
•
Agent and license prerequisites. None
•
Command result value. None. For a complete list, see
•
OS specifics. None
•
See
resource names and UNC
SetVariable
Creates a variable assignment and its value. The variable can then be entered in arguments throughout
a job rather than entering the value.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetVariable ( %value% )
Value. Enter or select a value to store in a variable assignment.
Examples
$disk = SetVariable( "\\ArrayA2\Pets\Cats\Vdisk66" )
Comments
•
Associated validation commands. None
•
Agent and license prerequisites. None
•
Command result value. None. For a complete list, see
•
OS specifics. None
•
To refer to the variable elsewhere in the job, you must enter a variable assignment. See
assignments.
SetWriteCacheModesUsingRepository
Sets the write cache mode of the storage volumes that underlie an Oracle database. The appropriate
storage volumes are automatically selected by reference to the enabled host and database specified
by the repository.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetWriteCacheModesUsingRepository ( %oraclerepository_unc_name%, %original_replicated%,
WRITE_CACHE_ENABLED )
UNC Oracle repository (%oraclerepository_unc_name% ). Select or enter the UNC name of the repository
whose storage volume write cache modes are to be set.
Original or Replicated (%original_replicated% ). Select original or replicated.
156
Job concepts, templates and commands
ValidateStorageVolume
command result
formats.
command result
values.
values.