Snapclonehostvolumetocontainersinmanagedset - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Drive
Drive & folders
Comments
• Associated validation commands. ValidateHostVolume,
• Agent and license prerequisites. Requires a host agent. Requires a local replication license for the
storage system on which the underlying storage volume (presented source) is located.
• Command result value. List of snapclone storage volume names (UNC). For a complete list,
see command result
• OS specifics. Yes. See examples above.
Tru64 UNIX. When this command is used with AdvFS volumes that have heavy I/O, HP
recommends briefly suspending the I/O before the replication step.
• Some storage volumes that underlie a host volume cannot be copied using snapclone replication.
• This command can be used with the CreateHostVolume command to re-create a host volume from
one enabled host on another enabled host.
• This command cannot be used with some older versions of controller software.
• See resource names and UNC

SnapcloneHostVolumeToContainersInManagedSet

Creates preallocated snapclones (point-in-time copies) of the storage volumes (virtual disks) that underlie
a host volume, by using containers in a managed set. The snapclone copies are presented to the enabled
host and a host bus scan is performed to identify the presented storage.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SnapcloneHostVolumeToContainersInManagedSet ( %hostvol_unc_name%, %managed_set_of_containers%,
NOWAIT )
UNC Host Volume Name (%hostvol_unc_name%). Select or enter the UNC name of the host volume to
be copied.
Managed Set Name (%managed_set_of_containers%). Select or enter the name of the managed set in
which the virtual disk containers are members.
Wait Flag. Select wait or nowait. See jobs
SnapcloneHostVolumeToContainers ( "\\HostA2\/home/cats", ("\\ArrayA2\CatsCon-
tainer", WAIT )
SnapcloneHostVolumeToContainers ( "\\HostA2\/users/cats", ("\\ArrayA2\CatsCon-
tainer", WAIT )
SnapcloneHostVolumeToContainers ( "\\HostA2\/var/cats", ("\\ArrayA2\CatsCon-
tainer", WAIT )
SnapcloneHostVolumeToContainers ( "\\HostA2\CATS", ("\\ArrayA2\CatsContainer",
WAIT )
SnapcloneHostVolumeToContainers ( "\\HostA2\/usr/cats", ("\\ArrayA2\CatsCon-
tainer", WAIT )
SnapcloneHostVolumeToContainers ( "\\HostA2\/dev/disk/dsk100c",
("\\ArrayA2\CatsContainer", WAIT )
SnapcloneHostVolumeToContainers ( "\\HostA2\E:\", ("\\ArrayA2\CatsContainer",
WAIT )
SnapcloneHostVolumeToContainers ( "\\HostA2\E:\pets\cats", ("\\ArrayA2\CatsCon-
tainer", WAIT )
values.
formats.
ValidateSnapcloneHostVolume
wait/nowait argument.
HP StorageWorks Replication Solutions Manager 4.0.1
163