Perform Unplanned Failover (Template) - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual
Job command reference
Hide thumbs
Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
- User manual (462 pages) ,
- Maintenance and service manual (63 pages) ,
- Firmware release notes (10 pages)
Table of Contents
Advertisement
Perform unplanned failover (template)
Template summary
Performs an unplanned failover of two sites in the case where the source site resources or link is no longer
available. The DR group pair contains one storage volume (virtual disk) at the source and destination sites.
A.
Performs a failover from site 1 to site 2.
B.
Discovers the host volume on an enabled host at site 2.
C.
Pauses the job prior to mounting the host volume on the enabled host at site 2.
Template options
•
Include e-mail notification. Adds a command for e-mail notification of the job instance status.
See SetNotificationPolicy.
Comments
•
Guidelines apply.
IMPORTANT:
During actual emergencies, HP recommends that you manually perform a failover by using the Failover
action in the GUI.
Example
This template was generated to perform one iteration of an unplanned failover of a DR group pair
containing one virtual disk.
48
Job concepts, templates and commands
Advertisement
Table of Contents
Need help?
Do you have a question about the 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure and is the answer not in the manual?
Questions and answers