HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual page 32

CreateDiskDevice ( %storvol_unc_name%, %host_name%, 0, READ_WRITE)
When selecting a specific resource from an Editing Task menu, the resource names are presented in a
UNC format, or other format, as appropriate for the resource. If you enter a resource name from the
keyboard, you must use the appropriate format.
IMPORTANT:
UNC names in job commands are case sensitive.
After selection or entry of arguments, the command is displayed with resource names in quotes, for
example:
CreateDiskDevice ( "\\ArrayA2\Cats", "HostA6", 12, READ_WRITE )
Name formats and examples for resource types follow.
DR groups
Name format (UNC)
\\array name\path\DR group name
Enabled hosts
The job editor and command validation accept these formats.
Name format (other)
Computer network name
Fully qualified network name
IP address
Host volumes
Applies to standard host volumes, volume groups, logical volumes, and host volume components such as
partitions and slices.
Name format (UNC)
\\host name\path\host volume name
32
Job concepts, templates and commands
Example
\\ArrayA2\DrGrpPets
Identifies the DR group named DrGrpPets on the storage
array named ArrayA2
Example
HostA6
HostA6.SiteA.corp
88.15.42.101
Each example identifies an enabled host using an
accepted format
OS specific example
AIX \\HostA2\/home/cats
HP-UX \\HostA2\/users/cats
Linux
\\HostA2\/var/cats
OpenVMS
\\HostA2\CATS
Solaris \\HostA2\/usr/cats
Tru64 UNIX \\HostA2\/users/cats
Windows \\HostA2\E:\pets\cats
For each OS, identifies the path and file named Cats
on the enabled host named HostA2