HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual page 97

Destination Storage System Name (%dest_storsys_name%). Select or enter the name of destination
storage system on which the destination DR group will be created.
Destination Disk Group. Select or enter the name of the disk group on the destination storage system
in which the destination storage volume (remote copy) will be created. If omitted, a default is applied
when the job is run.
Destination Storage Volume Name. Enter the name for the destination storage volume (remote copy). If
you do not enter a name, the same name as the source storage volume is automatically assigned. If
omitted, a default is applied when the job is run.
Destination RAID Level. Select or enter the redundancy level for the remote copy. Choices are RAID0,
RAID1, RAID5, and same.
Source Log Disk Group. Select or enter the name of the disk group in which to create the source storage
volume (virtual disk). If omitted, a default is applied when the job is run.
Destination Log Disk Group. Select or enter the name of the disk group in which to create the destination
storage volume (remote copy). If omitted, a default is applied when the job is run.
Maximum Log Disk Size (MB). Enter a maximum size for the log disk. An entry of zero indicates
no preference for the maximum size.
AutoSuspend on Link Down. Select or enter a mode. Choices are true (enabled) and false (disabled).
Examples
These examples show host volume mount points. Device names can also be used.
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Drive
Drive & folders
Comments
• Associated validation commands. ValidateHostVolume,
• Agent and license prerequisites. Requires a host agent on the source host. Requires remote
replication licenses on the source and destination storage systems.
• Command result value. DR group name (simple). For a complete list, see
• OS specifics. Yes. See examples above.
• Guidelines apply.
The maximum number of virtual disks per DR group and other properties are controller software
•
dependent.
CreateDrGroupFromHostVolume ( "DrGrpPets", "\\HostA2\/home/cats", "ArrayB7",
"", "", SAME, "", "", 10, FALSE )
CreateDrGroupFromHostVolume ( "DrGrpPets", "\\HostA2\/users/cats", "ArrayB7",
"", "", SAME, "", "", 10, FALSE )
CreateDrGroupFromHostVolume ( "DrGrpPets", "\\HostA2\/var/cats", "ArrayB7", "",
"", SAME, "", "", 10, FALSE )
CreateDrGroupFromHostVolume ( "DrGrpPets", "\\HostA2\CATS", "ArrayB7", "", "",
SAME, "", "", 10, FALSE )
CreateDrGroupFromHostVolume ( "DrGrpPets", "\\HostA2\/usr/cats", "ArrayB7", "",
"", SAME, "", "", 10, FALSE )
CreateDrGroupFromHostVolume ( "DrGrpPets", "\\HostA2\dom01#fset1", "ArrayB7",
"", "", SAME, "", "", 10, FALSE )
CreateDrGroupFromHostVolume ( "DrGrpPets", "\\HostA2\E:\", "ArrayB7", "", "",
SAME, "", "", 10, FALSE )
CreateDrGroupFromHostVolume ( "DrGrpPets", "\\HostA2\E:\pets\cats", "ArrayB7",
"", "", SAME, "", "", 10, FALSE )
ValidateStorageSystem
HP StorageWorks Replication Solutions Manager 4.0.1
command result values.
97