Unmount And Delete Existing Host Volumes (Template) - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

Line Task
1
// Throttle replication I/O on non-critical DR groups,
2
// so that critical DR groups will have the best performance.
3 //
4
// Assign some variables that will be used in this job.
5
$DR_Group_name_unc1 = SetVariable(%DR_Group_name_unc1%)
6
//
7 // Suspend the non-critical DR group(s).
8 SetDrGroupSuspend ($DR_Group_name_unc1, SUSPENDED) onerror pauseat E1:
9
//
10
// Wait for the critical DR group(s) to normalize.
1 1 WaitDrGroupNormalization (%critical_DR_Group_name_unc%)
12 //
13
// Resume the non-critical DR group(s).
14
E2: SetDrGroupSuspend ($DR_Group_name_unc1, RESUMED) onerror pauseat E2:
15
//
16 Exit (SUCCESS)
17
//
18
// Failure exit - no rollback needed.
19 E1: Exit (FAILURE)

Unmount and delete existing host volumes (template)

Template summary
Unmounts and deletes host volumes.
Template options
• Number of volumes to unmount and delete. Adds commands for each volume.
• Include e-mail notification. Adds a command for e-mail notification of the job instance status.
See SetNotificationPolicy.
Example
This template was generated to unmount and delete one host volume. No other template options were
selected.
HP StorageWorks Replication Solutions Manager 4.0.1
83