Sethostdiskdevicewritecachemode - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

When the job is run, remote replication is suspended or resumed as specified. If remote replication is
already as specified, no change in operation occurs.
Action specified
Resume
Resume
Suspend
Suspend
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetDrGroupSuspend ( %drgroup_unc_name%, RESUMED )
UNC DR Group Name ( %drgroup_unc_name%). Select or enter the UNC name of the source DR group
in the DR group pair.
Suspend Mode. Select or enter the suspension mode. Choices are suspended and resumed.
Examples
SetDrGroupSuspend ( "\\ArrayA2\DrGrpPets", RESUMED )
Comments
• Associated validation commands. None
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• OS specifics. None
• Command result value. None. For a complete list, see
• Guidelines apply.
• See resource names and UNC

SetHostDiskDeviceWriteCacheMode

Enables or disables (stops and flushes) the write cache of the storage volumes (virtual disks) that underlie
a host disk device.
When the job is run, the virtual disk write cache mode is enabled or disabled as specified. If the write
cache mode is already as specified, no change in operation occurs.
Action specified
Disable
Disable
Enable
Enable
State found when the
job is run
Resumed
Suspended
Resumed
Suspended
formats.
Mode found when the job is run
Disabled
Enabled
Disabled
Enabled
Resulting action
No change in remote replication
Remote replication is resumed (started)
Remote replication is suspended (stopped)
No change in remote replication
command result
HP StorageWorks Replication Solutions Manager 4.0.1
values.
Resulting action
No change in write cache
operation
Write caching is stopped and the
cache memory is written to disk
(flushed)
Write caching is started
No change in write cache
operation
147