Setdrgroupfailsafeonlinkdownpowerup; Setdrgrouphome - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

Failsafe Mode. Select or enter the failsafe mode (failsafe on unavailable member). Choices are enabled
and disabled.
Examples
SetDrGroupFailsafe ( "\\ArrayA2\DrGrpPets", ENABLED )
Comments
• Associated validation commands. None
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see
• OS specifics. None
• Guidelines apply.
• See also job command SetDrGroupFailsafeOnLinkDownPowerUp.
• See resource names and UNC

SetDrGroupFailsafeOnLinkDownPowerUp

Specifies whether or not virtual disks in a source DR group are automatically re-presented to hosts after a
power-up (reboot) of the source storage system when the link to the destination DR group is down.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetDrGroupFailsafeOnLinkdownPowerUp( %drgroup_unc_name%, DISABLED )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the DR group to
be changed.
Failsafe On Link-down/Power-up. Select or enter the mode. Choices are enabled and disabled.
Examples
SetDrGroupFailsafeOnLinkdownPowerUp ( "\\ArrayA2\DrGrpPets", DISABLED )
Comments
• Associated validation commands. None
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see
• OS specifics. None
• Guidelines apply.
• See also job command SetDrGroupFailsafe.
• When a job is run, some job arguments may specify features that are not available on the
target array.
• See resource names and UNC

SetDrGroupHome

Specifies the home property of a DR group pair.
144
Job concepts, templates and commands
command result
formats.
command result
formats.
values.
values.