Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
AddAllOracleTablespacesToRepository ( %oraclerepository_unc_name% )
UNC Oracle repository Name (%oraclerepository_unc_name%). Select or enter the UNC name of the
repository to which the Oracle tablespaces are to be added.
Examples
AddAllOracleTablespacesToRepository ( "\\HostA2\Catalog 20051214.021405" )
Comments
•
Associated validation commands.
•
Agent and license prerequisites. Requires a host agent. Requires an Oracle-integration license.
•
Command result value. None. For a complete list, see
•
OS specifics. None.
•
The repository must already exist or be created by a previous step in the same job.
•
See
resource names and UNC
AddDrGroupMember
Adds a storage volume to a source DR group and a corresponding storage volume (a remote copy) to a
destination DR group.
In other words, this command establishes a remote copy relationship between storage volumes on the
source and destination storage arrays.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
AddDrGroupMember ( %drgroup_unc_name%, %storvol_unc_name%, "", "", SAME )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the source DR group to
which the storage volume is to be added.
UNC Storage Volume Name (%storvol_unc_name%). Select or enter the UNC name of the source storage
volume to be added to the source DR group.
Destination Disk Group. Select or enter the UNC name of the disk group on the destination storage
system in which the destination storage volume (remote copy) is to be added. If omitted, a default is
applied when the job is run.
Destination Storage Volume Name. Enter the name for the destination storage volume (remote copy). If
omitted, the replication manager applies a default when the job is run.
Destination RAID LeveI. Select the redundancy level (Vraid) for the remote copy. Choices are RAID0,
RAID1, RAID5, and same. The default value is same.
Examples
AddDrGroupMember ( "\\ArrayA2\DrGrpPets", "\\ArrayA2\Cats", "\\ArrayB7\DskGrp3", "Cats",
SAME )
Comments
•
Associated validation commands. ValidateStorageSystem,
86
Job concepts, templates and commands
ValidateOracleTablespaces
command result
formats.
values.
ValidateStorageVolume