Examples
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Comments
•
Associated validation commands. ValidateHost.
•
Agent and license prerequisites. Requires a host agent.
•
Command result value. Snapclone storage volume name (UNC). For a complete list, see
command result
•
OS specifics. Yes. See examples above.
•
See
resource names and UNC
SnapcloneHostVolume
Creates snapclones (point-in-time copies) of the storage volumes (virtual disks) that underlies a host
volume. The snapclone copies are presented to the enabled host and a host bus scan is performed to
identify the presented storage.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SnapcloneHostVolume ( %hostvol_unc_name%, SAME, WAIT )
UNC Host Volume Name (%hostvol_unc_name%). Select or enter the UNC name of the host volume to
be copied.
RAID Level. Select the storage redundancy level for the copies. Choices are RAID0, RAID1, RAID5,
and same. See virtual disks redundancy level.
Wait for Discovery. Select wait or nowait. See jobs
Examples
Host volume mount points or device names can be used.
SnapcloneHostDiskDeviceToContainerInManagedSet ( "\\HostA2\/dev/dsk/hd1",
"hvol_cats_set", NOWAIT )
SnapcloneHostDiskDeviceToContainerInManagedSet ( "\\HostA2\/dev/dsk/c2t0d2",
"hvol_cats_set", NOWAIT )
SnapcloneHostDiskDeviceToContainerInManagedSet ( "\\HostA2\/dev/sda3",
"hvol_cats_set", NOWAIT )
SnapcloneHostDiskDeviceToContainerInManagedSet ( "\\HostA2\$1$DGA2:",
"hvol_cats_set", NOWAIT )
SnapcloneHostDiskDeviceToContainerInManagedSet ( "\\HostA2\/dev/dsk/c0t5d0s6",
"hvol_cats_set", NOWAIT )
SnapcloneHostDiskDeviceToContainerInManagedSet ( "\\HostA2\/dev/disk/dsk100c",
"hvol_cats_set", NOWAIT )
SnapcloneHostDiskDeviceToContainerInManagedSet ( "\HostA2\Disk3", "hvol_cats_set",
NOWAIT )
values.
formats.
wait/nowait
argument.
HP StorageWorks Replication Solutions Manager 4.0.1
159