Wait For Service - HP Brio BA200 User Manual

Wait for Service

Windows NT 4.0
Windows 2000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon] "WaitForService"="240"
"SwitchToDefaultOnError"="1"
"WaitForService" is the maximum amount of time (in seconds) you wait
for a service to start. Typically, the service that could fail to start is the
Resource Manager (
working reader attached to the system at boot time. In that particular
case, access is refused to the PC (by stopping the boot process) unless
the
SwitchToDefaultOnError
available at boot time and the
to , we switch to default logon method (CAD sequence) instead of
1
using a smart card reader.
If the
Manual Logon for ...
the
SwitchToDefaultOnError
ensure that access is refused to the PC even if the reader has been
intentionally removed.
). This would mean that there is no
SCARSVR.EXE
entry is set to
SwitchToDefaultOnError
option (in
WIN NT-Logon Policies
entry will automatically be set to
5 Troubleshooting
Smart Card Troubleshooting Help Zone
. If no reader is
1
entry is set
) is set to
Nobody
, then
to
0
71