Firmware Boot Side Options; Progress Indicator History - IBM QS22 - BladeCenter - 0793 Service Manual

Firmware Boot Side Options

Normally the BladeCenter QS22 boots from the Temporary side and you should not
change this. However, there may be occasions, for example boot failure, where you
must change the setting.

Progress Indicator History

This shows the messages from the present and previous attempts to boot the
blade. It also shows messages from the last occasion the blade could not boot from
the Temporary side, if any.
118
BladeCenter QS22 Type 0793: Problem Determination and Service Guide
To set the boot device order, type the menu number according to the order
you want for a particular device. For example, to choose the first boot
device, type 1 and press Enter. A screen showing all the available boot
devices appears:
PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
Select Device
Number Position
1.
2. 1
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
The screen shows the current position in the list for the displayed boot
devices. To alter the position, choose a device, type the number and press
Enter. To save your selection, press M to return to the menu.
PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
Firmware Boot Side Options Menu
Firmware Boot Side for next boot: Temporary
1. Permanent
2. Temporary
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
Device Name
Not Specified
NET /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet1
X = eXit System Management Services
X = eXit System Management Services