Ip Parameters - IBM QS22 - BladeCenter - 0793 Service Manual

PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
NIC Adapters (NET)
1. /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1
2. /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1,1
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
To view the Network Parameters screen type the number of the adapter you wish to
configure and press Enter. A screen similar to the following appears:
PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
Network Parameters
NET /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1

1. IP Parameters

2. Adapter Configuration
3. Ping Test
4. Advanced Setup: DHCP
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
Type the number of the menu item and press Enter.
IP Parameters
This allows you to configure IP for the network adapter to use static IP addresses or
TFTP. You should not change these setting if you use DHCP, which is the default.
X = eXit System Management Services
X = eXit System Management Services
Appendix A. Using the SMS utility
113