IBM 8863 - eServer xSeries 366 Service Manual page 147

8. Remove the screws that secure the power backplane to the chassis and lift the
power backplane out of the server.
To install a power backplane, complete the following steps:
1. Align the power backplane in the server and secure the power backplane with
screws.
2. Install the power-supply structure and the power supplies.
3. Slide the microprocessor tray in the server and close the microprocessor-tray
levers.
4. Install the memory cards.
5. Install the fans.
6. Replace the top cover.
7. Reconnect the external cables and power cords.
Chapter 4. Removing and replacing server components
131