IBM 8863 - eServer xSeries 366 Service Manual page 48

Problem determination and service guide
Hide thumbs Also See for 8863 - eServer xSeries 366:
Table of Contents

Advertisement

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Type 8863," on page 93 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)", that step must be performed only by a
trained service technician.
Error code
Description
01298005
No update data for processor 4.
01298101
Bad update data for processor 1.
01298102
Bad update data for processor 2.
01298103
Bad update data for processor 3.
32
IBM xSeries 366 Type 8863: Problem Determination and Service Guide
Action
1. Make sure that all microprocessors have the
same cache size (see "Configuration/Setup Utility
menu choices" on page 135).
2. Update the BIOS code again (see "Updating the
firmware" on page 133).
3. (Trained service technician only) Reseat
microprocessor 4.
4. (Trained service technician only) Replace
microprocessor 4.
1. Make sure that all microprocessors have the
same cache size (see "Configuration/Setup Utility
menu choices" on page 135).
2. Update the BIOS code again (see "Updating the
firmware" on page 133).
3. (Trained service technician only) Reseat
microprocessor 1.
4. (Trained service technician only) Replace
microprocessor 1.
1. Make sure that all microprocessors have the
same cache size (see "Configuration/Setup Utility
menu choices" on page 135).
2. Update the BIOS code again (see "Updating the
firmware" on page 133).
3. (Trained service technician only) Reseat
microprocessor 2.
4. (Trained service technician only) Replace
microprocessor 2.
1. Make sure that all microprocessors have the
same cache size (see "Configuration/Setup Utility
menu choices" on page 135).
2. Update the BIOS code again (see "Updating the
firmware" on page 133).
3. (Trained service technician only) Reseat
microprocessor 3.
4. (Trained service technician only) Replace
microprocessor 3.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xseries 366 8863

Table of Contents