IBM 8185 - ThinkCentre M50 - 256 MB RAM User Manual
User guide
Hide thumbs
Also See for 8185 - ThinkCentre M50 - 256 MB RAM:
- Hardware maintenance manual (290 pages)
Related Manuals for IBM 8185 - ThinkCentre M50 - 256 MB RAM
Summary of Contents for IBM 8185 - ThinkCentre M50 - 256 MB RAM
-
Page 1: User Guide
™ ThinkCentre User Guide Types 8128, 8185, 8186, 8187, 8188 Types 8189, 8190, 8192, 8193, 8194 Types 8195, 8196, 8197, 8413, 8414 Types 8415, 8430, 8431, 8432, 8433... - Page 3 ™ ThinkCentre User Guide Types 8128, 8185, 8186, 8187, 8188 Types 8189, 8190, 8192, 8193, 8194 Types 8195, 8196, 8197, 8413, 8414 Types 8415, 8430, 8431, 8432, 8433...
- Page 4 Before using this information and the product it supports, be sure to read the “Important safety information” on page v and Appendix E, “Notices,” on page 117. Fourth Edition (August 2004) © Copyright International Business Machines Corporation 2004. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
-
Page 5: Table Of Contents
8193, 8414, and 8431 ..23 Changing the battery . . 68 Erasing a lost or forgotten password (clearing Features . 23 CMOS) . . 69 Specifications . . 26 © Copyright IBM Corp. 2004... - Page 6 . 96 unit (CRU) parts list ..115 Chapter 5. Using the IBM Setup Utility program ....99 Appendix E. Notices ..117 Starting the IBM Setup Utility program .
-
Page 7: Important Safety Information
Follow and retain all information included with your IBM computer. The information in this document does not alter the terms of your purchase agreement or the IBM Statement of Limited Warranty. Customer safety is important to IBM. Our products are developed to be safe and effective. -
Page 8: General Safety Guidelines
Always observe the following precautions to reduce the risk of injury and property damage. Service Do not attempt to service a product yourself unless instructed to do so by the IBM HelpCenter. Use only an IBM authorized service provider who is approved to repair your particular product. -
Page 9: Extension Cords And Related Devices
In addition many mobile products such as Thinkpad notebook PCs utilize a rechargeable battery pack to provide system power when in portable mode. Batteries supplied by IBM for use with your product have been tested for compatibility and should only be replaced with IBM approved parts. -
Page 10: Heat And Product Ventilation
foreign materials on the battery leads, stop using the battery and obtain a replacement from the battery manufacturer. Batteries can degrade when they are left unused for long periods of time. For some rechargeable batteries (particularly Lithium Ion batteries), leaving a battery unused in a discharged state could increase the risk of a battery short circuit, which could shorten the life of the battery and can also pose a safety hazard. -
Page 11: Additional Safety Information
Additional safety information DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. v Connect all power cords to a properly wired and grounded electrical outlet. -
Page 12: Lithium Battery Notice
CAUTION: Danger of explosion if battery is incorrectly replaced. When replacing the battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of. -
Page 13: Laser Compliance Statement
Laser compliance statement Some IBM Personal Computer models are equipped from the factory with a CD-ROM drive or a DVD-ROM drive. CD-ROM drives and DVD-ROM drives are also sold separately as options. CD-ROM drives and DVD-ROM drives are laser products. - Page 14 DANGER: Certains modèles d’ordinateurs personnels sont équipés d’origine d’une unité de CD-ROM ou de DVD-ROM. Mais ces unités sont également vendues séparément en tant qu’options. L’unité de CD-ROM/DVD-ROM est un appareil à laser. Aux État-Unis, l’unité de CD-ROM/DVD-ROM est certifiée conforme aux normes indiquées dans le sous-chapitre J du DHHS 21 CFR relatif aux produits à...
-
Page 15: Overview
Overview Thank you for selecting an IBM computer. Your computer incorporates many of the latest advances in computer technology and can be upgraded as your needs change. This publication supports several computer models. Information in this section will help you identify your computer and help you find the chapter that contains information specific to your computer. -
Page 16: Identifying Your Computer
Identifying your computer See Chapter 1, “Types 8185, 8186, 8192, 8413, and 8430,” on page 1. See Chapter 2, “Types 8128, 8187, 8188, 8193, 8414, and 8431,” on page See Chapter 3, “Types 8196 and 8197,” on page 47. See Chapter 4, “Types 8189, 8190, 8194, 8195, 8415, 8432, and 8433,”... -
Page 17: Chapter 1. Types 8185, 8186, 8192, 8413, And 8430
System information The following information covers a variety of models. For a listing of the features for your specific model, refer to the IBM Setup Utility program. See Chapter 5, “Using the IBM Setup Utility program,” on page 99. Microprocessor (varies by model type) ®... - Page 18 Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) v Wake on LAN v Wake on Ring (in the IBM Setup Utility program, this feature is called Serial Port Ring Detect for an external modem) v Remote Administration...
- Page 19 1. The operating systems listed here are being tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by IBM as compatible with your computer following the publication of this booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been tested for compatibility, check the Web site of the operating system vendor.
-
Page 20: Specifications
Specifications This section lists the physical specifications for your computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Height: 104 mm (4.1 in.) Minimum configuration: 257 Btu/hr (75 watts) Width: 360 mm (14.2 in.) Maximum configuration: 683 Btu/hr (200 watts) Depth: 412 mm (16.2 in.) Airflow Weight... -
Page 21: Available Options
Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM reseller, or IBM marketing representative. v Within Canada, call 1-800-565-3344 or 1-800-IBM-4YOU. v Outside the United States and Canada, contact your IBM reseller or IBM marketing representative. Tools required To install some options in your computer, you might need a flat-blade or Phillips screwdriver. -
Page 22: Installing External Options
v Always handle components carefully. Handle adapters and memory modules by the edges. Never touch any exposed circuitry. v Prevent others from touching components. v When you install a new option, touch the static-protective package containing the option to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. -
Page 23: Locating The Connectors On The Rear Of Your Computer
Locating the connectors on the rear of your computer The following illustration shows the locations of the connectors on the rear of the computer. 1 Mouse connector 8 AGP slot 2 Parallel connector 9 Audio line out connector 3 USB connectors 10 Microphone connector 4 Ethernet connector 11 USB connectors... -
Page 24: Obtaining Device Drivers
Used to attach a keyboard that uses a standard keyboard connector. Obtaining device drivers You can obtain device drivers for operating systems that are not preinstalled at http://www.ibm.com/pc/support/ on the World Wide Web. Installation instructions are provided in README files with the device-driver files. User Guide... -
Page 25: Removing The Cover
Removing the cover Important Read “Important safety information” on page v and “Handling static-sensitive devices” on page 5 before removing the cover. To remove the cover: 1. Shut down your operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn off all attached devices and the computer. 2. -
Page 26: Locating Components
Identifying parts on the system board The system board (sometimes called the planar or motherboard) is the main circuit board in your computer. It provides basic computer functions and supports a variety of devices that are IBM-installed or that you can install later. User Guide... -
Page 27: Installing Memory
The following illustration shows the locations of parts on the system board. 1 Microprocessor 11 SATA 2 IDE connector 2 DIMM connector 1 12 Promise of value (POV) daughter card (some models) 3 DIMM connector 2 13 Clear CMOS/Recovery jumper 4 DIMM connector 3 14 Battery 5 DIMM connector 4... -
Page 28: Installing Adapters
To install a DIMM: 1. Remove the cover. See “Removing the cover” on page 9. 2. Locate the DIMM connectors. See “Identifying parts on the system board” on page 10. 3. Open the retaining clips. 4. Make sure the notches in the DIMM align with the tabs on the connector. Push or insert the DIMM straight down into the connector until the retaining clips close. - Page 29 To install an adapter: 1. Remove the cover. See “Removing the cover” on page 9. 2. Pivot one of the drive bay latch handles toward the front of the computer and then pivot the drive bay cage upward, as shown, until it is latched in the up position.
-
Page 30: Installing Internal Drives
Also, it is important to correctly connect the internal drive cables to the installed drive. Drive specifications Your computer might come with the following IBM-installed drives: v A 3.5-inch diskette drive in bay 1 v A CD-ROM drive or DVD-ROM drive in bay 2 (some models) v A 3.5-inch hard disk drive in bay 3... -
Page 31: Installing A Cd-Rom Or Dvd-Rom Drive
The following illustration shows the locations of the drive bays. The following list describes some of the drives that you can install in each bay and their height requirements: 1 Bay 1 - Maximum height: 25.8 mm (1.0 in.) 3.5-inch diskette drive (preinstalled) 2 Bay 2 - Maximum height: 43.0 mm (1.7 in.) CD-ROM drive or DVD-ROM drive (preinstalled in some models) 3 Bay 3 - Maximum height: 25.8 mm (1.0 in.) 3.5-inch hard disk drive (preinstalled) - Page 32 5. Pivot the drive bay latch handle toward the front of the computer and then pivot the drive bay cage upward, as shown, until it is latched in the up position. 6. Install the drive into the bay. Align the screw holes and insert the two screws. 7.
-
Page 33: Installing Security Features
d. Your computer has extra power connectors for connecting additional drives. Connect the power cable to the drive. 8. Clear any cables that might impede replacement of the drive cage. 9. Pivot the drive cage back into place. What to do next: v To work with another option, go to the appropriate section. -
Page 34: Rope Clip
Rope clip Using a 3/16-inch or 5-mm rope clip (sometimes referred to as a U-bolt), a steel security cable, and a padlock can secure your computer to a desk, table, or other non-permanent fixture. For computers designed to accommodate the rope clip, knockouts at the rear of the chassis are provided. -
Page 35: Integrated Cable Lock
Kensington. Password protection To deter unauthorized use of your computer, you can use the IBM Setup Utility program to set a password. When you turn on your computer you are prompted to type the password to unlock the keyboard for normal use. -
Page 36: Erasing A Lost Or Forgotten Password (Clearing Cmos)
9. Turn on the computer and all attached devices. 10. Use the IBM Setup Utility program to set the date and time and any passwords. See Chapter 5, “Using the IBM Setup Utility program,” on page 99. -
Page 37: Replacing The Cover And Connecting The Cables
4. Reconnect the external cables and power cords to the computer. See “Installing external options” on page 6. 5. To update the configuration, see Chapter 5, “Using the IBM Setup Utility program,” on page 99. Chapter 1. Types 8185, 8186, 8192, 8413, and 8430... - Page 38 User Guide...
-
Page 39: Chapter 2. Types 8128, 8187, 8188, 8193, 8414, And 8431
System information The following information covers a variety of models. For a listing of the features for your specific model, refer to the IBM Setup Utility program. See Chapter 5, “Using the IBM Setup Utility program,” on page 99. Microprocessor (varies by model type) ®... - Page 40 Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) v Wake on LAN v Wake on Ring (in the IBM Setup Utility program, this feature is called Serial Port Ring Detect for an external modem) v Remote Administration...
- Page 41 2. The operating systems listed here are being tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by IBM as compatible with your computer following the publication of this booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been tested for compatibility, check the Web site of the operating system vendor.
-
Page 42: Specifications
Specifications This section lists the physical specifications for your computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Height: 140 mm (5.5 in.) Minimum configuration: 257 Btu/hr (75 watts) Width: 425 mm (16.7 in.) Maximum configuration: 785 Btu/hr (230 watts) Depth: 425 mm (16.7 in) Airflow Weight... -
Page 43: Available Options
Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM reseller, or IBM marketing representative. v Within Canada, call 1-800-565-3344 or 1-800-IBM-4YOU. v Outside the United States and Canada, contact your IBM reseller or IBM marketing representative. Tools required To install some options in your computer, you might need a flat-blade or Phillips screwdriver. -
Page 44: Installing External Options
v Prevent others from touching components. v When you install a new option, touch the static-protective package containing the option to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity in the package and your body. -
Page 45: Locating The Connectors On The Rear Of Your Computer
Locating the connectors on the rear of your computer The following illustration shows the locations of the connectors on the rear of the computer. 1 Power connector 8 AGP slot 2 Mouse connector 9 Audio line out connector 3 Parallel connector 10 Microphone connector 4 USB connectors 11 USB connectors... -
Page 46: Obtaining Device Drivers
Used to attach a keyboard that uses a standard keyboard connector. Obtaining device drivers You can obtain device drivers for operating systems that are not preinstalled at http://www.ibm.com/pc/support/ on the World Wide Web. Installation instructions are provided in README files with the device-driver files. User Guide... -
Page 47: Removing The Cover
Removing the cover Important: Read “Important safety information” on page v and “Handling static-sensitive devices” on page 27 before removing the cover. To remove the cover: 1. Shut down your operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn off all attached devices and the computer. 2. -
Page 48: Locating Components
Identifying parts on the system board The system board (sometimes called the planar or motherboard) is the main circuit board in your computer. It provides basic computer functions and supports a variety of devices that are IBM-installed or that you can install later. User Guide... -
Page 49: Installing Memory
The following illustration shows the locations of parts on the system board. 1 Microprocessor 11 SATA 2 IDE connector 2 DIMM connector 1 12 Promise of value (POV) daughter card (some models) 3 DIMM connector 2 13 Clear CMOS/Recovery jumper 4 DIMM connector 3 14 Battery 5 DIMM connector 4... -
Page 50: Installing Adapters
To install a DIMM: 1. Remove the cover. See “Removing the cover” on page 31. 2. You might have to remove an adapter to gain access to the DIMM slots. See “Installing adapters” on page 34. 3. Locate the DIMM connectors. See “Identifying parts on the system board” on page 32. - Page 51 To install an adapter: 1. Remove the cover. See “Removing the cover” on page 31. 2. Remove the adapter-slot-cover latch and the slot cover for the appropriate expansion slot. 3. Remove the adapter from its static-protective package. 4. Install the adapter into the appropriate slot on the system board. 5.
-
Page 52: Installing Internal Drives
Also, it is important to correctly connect the internal drive cables to the installed drive. Drive specifications Your computer comes with the following IBM-installed drives: v A CD drive or DVD drive in bay 1 (some models) v A 3.5-inch hard disk drive in bay 3 v A 3.5-inch diskette drive in bay 4... -
Page 53: Installing A Drive
The following illustration shows the locations of the drive bays. The following list describes some of the drives that you can install in each bay and their height requirements: 1 Bay 1 - Maximum height: 43.0 mm (1.7 in.) CD drive or DVD drive (preinstalled in some models) 5.25-inch hard disk drive 2 Bay 2 - Maximum height: 43.0 mm (1.7 in.) - Page 54 4. Remove the metal shield from the drive bay by inserting a flat-blade screwdriver into one of the slots and gently prying it loose. 5. Pivot the drive-bay latch handle toward the front of the computer and then pivot the drive-bay cage upward, as shown, until it is latched in the upright position.
- Page 55 7. Install the drive into the bay. Align the screw holes and insert the two screws. 8. Pivot the drive-bay cage back into place. 9. A hard disk drive requires two cables; a power cable that connects to the power supply and a signal cable that connects to the system board.
-
Page 56: Installing Security Features
4. Your computer has extra power connectors for additional drives. Connect a power connector to the drive. 5. If you have a CD-ROM audio cable, connect it to the drive and to the system board. See “Identifying parts on the system board” on page 32. Connecting an additional CD drive, DVD drive, or parallel ATA hard disk drive 1. -
Page 57: Identifying Security Locks
Identifying security locks The following illustration shows the locations of the security features on the rear of the computer. 1 Rope clip 2 Integrated cable lock Rope clip Using a 3/16-inch or 5-mm rope clip (sometimes referred to as a U-bolt), a steel security cable, and a padlock can secure your computer to a desk, table, or other non-permanent fixture. - Page 58 5. Thread the cable through the rope clip and around an object that is not a part of or permanently secured to the building structure or foundation, and from which it cannot be removed; then fasten the cable ends together with a lock. User Guide...
-
Page 59: Integrated Cable Lock
Kensington. Password protection To deter unauthorized use of your computer, you can use the IBM Setup Utility program to set a password. When you turn on your computer you are prompted to type the password to unlock the keyboard for normal use. -
Page 60: Erasing A Lost Or Forgotten Password (Clearing Cmos)
9. Turn on the computer and all attached devices. 10. Use the IBM Setup Utility program to set the date and time and any passwords. See Chapter 5, “Using the IBM Setup Utility program,” on page 99. -
Page 61: Replacing The Cover And Connecting The Cables
4. Reconnect the external cables and power cords to the computer. See “Installing external options” on page 28. 5. To update the configuration, see Chapter 5, “Using the IBM Setup Utility program,” on page 99. Chapter 2. Types 8128, 8187, 8188, 8193, 8414, and 8431... - Page 62 User Guide...
-
Page 63: Chapter 3. Types 8196 And 8197
System information The following information covers a variety of models. For a listing of the features for your specific model, refer to the IBM Setup Utility program. See Chapter 5, “Using the IBM Setup Utility program,” on page 99. Microprocessor (varies by model type) ®... - Page 64 Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) v Wake on LAN v Wake on Ring (in the IBM Setup Utility program, this feature is called Serial Port Ring Detect for an external modem) v Remote Administration...
- Page 65 3. The operating systems listed here are being tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by IBM as compatible with your computer following the publication of this booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been tested for compatibility, check the Web site of the operating system vendor.
-
Page 66: Specifications
Specifications This section lists the physical specifications for your computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Height: 398 mm (15.67 in.) Minimum configuration: 257 Btu/hr (75 watts) Width: 180 mm (7.08 in.) Maximum configuration: 785 Btu/hr (230 watts) Depth: 402 mm (15.82 in.) Airflow Weight... -
Page 67: Available Options
Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM reseller, or IBM marketing representative. v Within Canada, call 1-800-565-3344 or 1-800-IBM-4YOU. v Outside the United States and Canada, contact your IBM reseller or IBM marketing representative. Tools required To install some options in your computer, you might need a flat-blade or Phillips screwdriver. -
Page 68: Installing External Options
v Prevent others from touching components. v When you install a new option, touch the static-protective package containing the option to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity in the package and your body. -
Page 69: Locating The Connectors On The Front Of Your Computer
Locating the connectors on the front of your computer The following illustration shows the locations of the USB connectors on the front of the computer. 1 USB connector 2 USB connector Chapter 3. Types 8196 and 8197... -
Page 70: Locating The Connectors On The Rear Of Your Computer
Locating the connectors on the rear of your computer The following illustration shows the locations of the connectors on the rear of the computer. 1 Power connector 8 USB connectors 2 Mouse connector 9 Ethernet connector 3 Keyboard connector 10 Microphone connector 4 Serial connector 11 Audio line out connector 5 Parallel connector... -
Page 71: Obtaining Device Drivers
Obtaining device drivers You can obtain device drivers for operating systems that are not preinstalled at http://www.ibm.com/pc/support/ on the World Wide Web. Installation instructions are provided in README files with the device-driver files. Chapter 3. Types 8196 and 8197... -
Page 72: Removing The Cover
Removing the cover Important Read “Important safety information” on page v and “Handling static-sensitive devices” on page 51 before removing the cover. To remove the cover: 1. Shut down your operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn off all attached devices and the computer. 2. -
Page 73: Locating Components
The system board (sometimes called the planar or motherboard) is the main circuit board in your computer. It provides basic computer functions and supports a variety of devices that are IBM-installed or that you can install later. Chapter 3. Types 8196 and 8197... -
Page 74: Installing Memory
The following illustration shows the locations of parts on the system board. 1 Microprocessor 11 SATA 2 IDE connector 2 DIMM connector 1 12 Promise of value (POV) daughter card (some models) 3 DIMM connector 2 13 Clear CMOS/Recovery jumper 4 DIMM connector 3 14 Battery 5 DIMM connector 4... - Page 75 To install a DIMM: 1. Remove the cover. See “Removing the cover” on page 56. 2. You might have to remove an adapter to gain access to the DIMM slots. See “Installing adapters” on page 60. 3. Locate the DIMM connectors. See “Identifying parts on the system board” on page 57.
-
Page 76: Installing Adapters
Installing adapters This section provides information and instructions for installing and removing adapters. Your computer has three expansion slots for PCI adapters. You can install an adapter up to 228 mm (9 inches) long. To install an adapter: 1. Remove the cover. See “Removing the cover” on page 56. 2. -
Page 77: Installing Internal Drives
5. Secure the adapter with the screw as shown. What to do next v To work with another option, go to the appropriate section. v To complete the installation, go to “Replacing the cover and connecting the cables” on page 70. Installing internal drives This section provides information and instructions for installing and removing internal drives. -
Page 78: Drive Specifications
Drive specifications Your computer comes with the following IBM-installed drives: v A CD drive or DVD drive in bay 1 v A 3.5-inch diskette disk drive in bay 3 v A 3.5-inch hard drive in bay 4 Any bay that does not have a drive installed has a static shield and bay panel installed. - Page 79 3. Remove the bay panel from the drive bay by inserting a flat-blade screwdriver at the end and gently prying it loose. 4. Remove the metal shield from the drive bay by inserting a flat-blade screwdriver into one of the slots and gently prying it loose. 5.
- Page 80 6. Install the drive into the bay. Align the screw holes and install two screws to secure the drive. 7. A hard disk drive requires two cables; a power cable that connects to the power supply and a signal cable that connects to the system board. v A parallel ATA hard disk drive requires a four-wire power cable.
-
Page 81: Installing Security Features
3. Connect one end of the signal cable to the drive and the other to the PATA secondary IDE connector on the system board. To reduce electronic noise, use the connectors at the end of the cable only. 4. Your computer has extra power connectors for additional drives. Connect a power connector to the drive. -
Page 82: Identifying Security Locks
Identifying security locks The following illustration shows the locations of the security features on the rear of the computer. 1 Rope clip 2 Integrated cable lock 3 Padlock loop Rope clip Using a 3/16-inch or 5-mm rope clip (sometimes referred to as a U-bolt), a steel security cable, and a padlock can secure your computer to a desk, table, or other non-permanent fixture. - Page 83 5. Thread the cable through the rope clip and around an object that is not a part of or permanently secured to the building structure or foundation, and from which it cannot be removed; then fasten the cable ends together with a lock. Chapter 3.
-
Page 84: Integrated Cable Lock
Kensington. Password protection To deter unauthorized use of your computer, you can use the IBM Setup Utility program to set a password. When you turn on your computer you are prompted to type the password to unlock the keyboard for normal use. -
Page 85: Erasing A Lost Or Forgotten Password (Clearing Cmos)
This is normal after replacing the battery. 9. Turn on the computer and all attached devices. 10. Use the IBM Setup Utility program to set the date and time and any passwords. Erasing a lost or forgotten password (clearing CMOS) This section applies to lost or forgotten passwords. -
Page 86: Replacing The Cover And Connecting The Cables
Also, depending on the option that is installed, you might need to confirm the updated information in the IBM Setup Utility program. To replace the cover and connect cables to your computer: 1. - Page 87 4. Reconnect the external cables and power cords to the computer. See “Installing external options” on page 52. 5. To update the configuration, see Chapter 5, “Using the IBM Setup Utility program,” on page 99. Chapter 3. Types 8196 and 8197...
- Page 88 User Guide...
-
Page 89: Chapter 4. Types 8189, 8190, 8194, 8195, 8415, 8432, And 8433
System information The following information covers a variety of models. For a listing of the features for your specific model, refer to the IBM Setup Utility program. See Chapter 5, “Using the IBM Setup Utility program,” on page 99. Microprocessor (varies by model type) ®... - Page 90 Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) v Wake on LAN v Wake on Ring (in the IBM Setup Utility program, this feature is called Serial Port Ring Detect for an external modem) v Remote Administration...
- Page 91 4. The operating systems listed here are being tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by IBM as compatible with your computer following the publication of this booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been tested for compatibility, check the Web site of the operating system vendor.
-
Page 92: Specifications
Specifications This section lists the physical specifications for your computer. Dimensions Heat output (approximate) in British thermal units (Btu) per hour: Height: 413 mm (16.25 in.) Minimum configuration: 257 Btu/hr (75 watts) Width: 191 mm (7.5 in.) Maximum configuration: 785 Btu/hr (230 watts) Depth: 406 mm (16 in.) Airflow Weight... -
Page 93: Available Options
Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM reseller, or IBM marketing representative. v Within Canada, call 1-800-565-3344 or 1-800-IBM-4YOU. v Outside the United States and Canada, contact your IBM reseller or IBM marketing representative. Tools required To install some options in your computer, you might need a flat-blade or Phillips screwdriver. -
Page 94: Installing External Options
v Always handle components carefully. Handle adapters and memory modules by the edges. Never touch any exposed circuitry. v Prevent others from touching components. v When you install a new option, touch the static-protective package containing the option to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. -
Page 95: Locating The Connectors On The Front Of Your Computer
Locating the connectors on the front of your computer The following illustration shows the locations of the connectors on the front of the computer. Note: Not all computer models will have the following connectors. 1 IEEE 1394 connector 4 USB connector 2 Microphone connector 5 USB connector 3 Headphone connector... -
Page 96: Locating The Connectors On The Rear Of Your Computer
Locating the connectors on the rear of your computer The following illustration shows the locations of the connectors on the rear of the computer. 1 Power connector 8 USB connectors 2 Mouse connector 9 Ethernet connector 3 Keyboard connector 10 Microphone connector 4 Serial connector 11 Audio line out connector 5 Parallel connector... -
Page 97: Obtaining Device Drivers
Obtaining device drivers You can obtain device drivers for operating systems that are not preinstalled at http://www.ibm.com/pc/support/ on the World Wide Web. Installation instructions are provided in README files with the device-driver files. Chapter 4. Types 8189, 8190, 8194, 8195, 8415, 8432, and 8433... -
Page 98: Removing The Cover
Removing the cover Important Read “Important safety information” on page v and “Handling static-sensitive devices” on page 77 before removing the cover. To remove the cover: 1. Shut down your operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn off all attached devices and the computer. 2. -
Page 99: Locating Components
The system board (sometimes called the planar or motherboard) is the main circuit board in your computer. It provides basic computer functions and supports a variety of devices that are IBM-installed or that you can install later. Chapter 4. Types 8189, 8190, 8194, 8195, 8415, 8432, and 8433... -
Page 100: Installing Memory
The following illustration shows the locations of parts on the system board. 1 Microprocessor 11 SATA 2 IDE connector 2 DIMM connector 1 12 Promise of value (POV) daughter card (some models) 3 DIMM connector 2 13 Clear CMOS/Recovery jumper 4 DIMM connector 3 14 Battery 5 DIMM connector 4... -
Page 101: Installing Adapters
To install a DIMM: 1. Remove the cover. See “Removing the cover” on page 82. 2. You might have to remove an adapter to gain access to the DIMM slots. See “Installing adapters.” 3. Locate the DIMM connectors. See “Identifying parts on the system board” on page 83. - Page 102 2. Remove the adapter-slot-cover latch and the slot cover for the appropriate expansion slot. 3. Remove the adapter from its static-protective package. 4. Install the adapter into the appropriate slot on the system board. 5. Install the adapter-slot-cover latch. What to do next v To work with another option, go to the appropriate section.
-
Page 103: Installing Internal Drives
Also, it is important to correctly connect the internal drive cables to the installed drive. Drive specifications Your computer comes with the following IBM-installed drives: v A CD drive or DVD drive in bay 1 (some models) v A 3.5-inch diskette disk drive in bay 4 v A 3.5-inch hard drive in bay 5... -
Page 104: Installing A Drive
The following illustration shows the locations of the drive bays. The following list describes some of the drives you can install in each bay and their height requirements: 1 Bay 1 - Maximum height: 43.0 mm (1.7 in.) CD drive or DVD drive (preinstalled in some models) 5.25-inch hard disk drive 2 Bay 2 - Maximum height: 43.0 mm (1.7 in.) - Page 105 4. Remove the metal shield from the drive bay by inserting a flat-blade screwdriver into one of the slots and gently prying it loose. 5. Make sure the drive that you are installing is set correctly as either a master or a slave device.
- Page 106 7. Install the drive into the bay and lock it into position. Note: Some drives might require screws to secure the drive into the bay. If this is the case, align the screw holes, and insert the screws to secure the drive.
-
Page 107: Installing Security Features
2. Locate the PATA secondary IDE connector on the system board. See “Identifying parts on the system board” on page 83. 3. Connect one end of the signal cable to the drive and the other to the PATA secondary IDE connector on the system board. To reduce electronic noise, use the connectors at the end of the cable only. -
Page 108: Identifying Security Locks
Identifying security locks The following illustration shows the locations of the security features on the rear of the computer. 1 Rope clip 2 Integrated cable lock Rope clip Using a 3/16-inch or 5-mm rope clip (sometimes referred to as a U-bolt), a steel security cable, and a padlock can secure your computer to a desk, table, or other non-permanent fixture. - Page 109 5. Thread the cable through the rope clip and around an object that is not a part of or permanently secured to the building structure or foundation, and from which it cannot be removed; then fasten the cable ends together with a lock. Chapter 4.
-
Page 110: Integrated Cable Lock
Kensington. Password protection To deter unauthorized use of your computer, you can use the IBM Setup Utility program to set a password. When you turn on your computer you are prompted to type the password to unlock the keyboard for normal use. -
Page 111: Erasing A Lost Or Forgotten Password (Clearing Cmos)
9. Turn on the computer and all attached devices. 10. Use the IBM Setup Utility program to set the date and time and any passwords. See Chapter 5, “Using the IBM Setup Utility program,” on page 99. -
Page 112: Replacing The Cover And Connecting The Cables
Also, depending on the option that is installed, you might need to confirm the updated information in the IBM Setup Utility program. To replace the cover and connect cables to your computer: 1. - Page 113 5. To update the configuration, see Chapter 5, “Using the IBM Setup Utility program,” on page 99. Chapter 4. Types 8189, 8190, 8194, 8195, 8415, 8432, and 8433...
- Page 114 User Guide...
-
Page 115: Chapter 5. Using The Ibm Setup Utility Program
Exiting from the IBM Setup Utility program When you finish viewing or changing settings, press Esc to return to the IBM Setup Utility program menu (you might have to press Esc several times). If you want to save the new settings, select Save Settings before you exit. Otherwise, your changes will not be saved. -
Page 116: User Password
After you set an administrator password, a password prompt is displayed each time you try to access the IBM Setup Utility program. If you type the wrong password, you will see an error message. If you type the wrong password three times, you must turn the computer off and start again. -
Page 117: Using Ide Drives Setup
2. From the IBM Setup Utility program menu, select Devices. 3. Select IDE Drives Setup. 4. Select the desired devices and settings and press Enter. 5. Return to the IBM Setup Utility program menu and select Exit and then Save Settings. Selecting a startup device... -
Page 118: Advanced Settings
1. Start the IBM Setup Utility program (see “Starting the IBM Setup Utility program” on page 99). 2. Select Startup. 3. Select Startup Sequence. See the information displayed on the right side of the screen. 4. Select the sequence of devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error Startup Sequence. -
Page 119: Appendix A. Updating System Programs
They include the power-on self-test (POST), the basic input/output system (BIOS) code, and the IBM Setup Utility program. POST is a set of tests and procedures that is performed each time you turn on your computer. BIOS is a layer of software that translates instructions from other layers of software into electrical signals that the computer hardware can understand. -
Page 120: Recovering From A Post/Bios Update Failure
6. Scroll down and look for a .txt file that has instructions for Flash BIOS update from the operating system. Click the .txt file. 7. Print these instructions. This is very important since they are not on the screen after the download begins. 8. -
Page 121: Appendix B. Cleaning The Mouse
To clean a mouse with a ball: 1. Turn off your computer. 2. Turn the mouse over, with the top side down, and look carefully at the bottom. Twist the retainer ring 1 to the unlocked position to remove the ball. © Copyright IBM Corp. 2004... - Page 122 3. Place your hand over the retainer ring and ball 2 , and then turn the mouse over, top side up, so that the retainer ring and ball fall out into your hand. 4. Wash the ball in warm, soapy water then dry it with a clean cloth. Blow air carefully into the ball cage 4 to dislodge dust and lint.
-
Page 123: Appendix C. Manual Modem Commands
Dial one of the four telephone numbers (n=0-3) stored in the modem non-volatile memory. Commands are not echoed Commands are echoed Escape Characters - Switch from Data Mode to Command Mode (T.I.E.S. Command) Force modem on-hook (hang up) © Copyright IBM Corp. 2004... - Page 124 Command Function Force modem off-hook (make busy) Note: H1 command is not supported for Italy Display product-identification code Factory ROM checksum test Internal memory test Firmware ID Reserved ID Low speaker volume Low speaker volume Medium speaker volume High speaker volume Internal speaker off Internal speaker on until carrier detected Internal speaker always on...
-
Page 125: Extended At Commands
Extended AT commands Command Function &C_ &C0 Force Carrier Detect Signal High (ON) &C1 Turn on CD when remote carrier is present &D0 &D_ Modem ignores the DTR signal &D1 Modem returns to Command Mode after DTR toggle &D2 Modem hangs up, returns to the Command Mode after DTR toggle &D3 Resets modem after DTR toggle... -
Page 126: Mnp/V.42/V.42Bis/V.44 Commands
Command Function &V1 Display Last Connection Statistics &W_ &W0 Stores the active profile as Profile 0 &W1 Stores the active profile as Profile 1 Disable auto-retrain Enable auto-retrain +MS? Displays the current Select Modulation settings +MS=? Displays a list of supported Select Modulation options +MS=a,b,c,e,f Select modulation where: a=0, 1, 2, 3, 9, 10, 11,... -
Page 127: Fax Class 1 Commands
Fax Class 1 commands +FAE=n Data/Fax Auto Answer +FCLASS=n Service Class +FRH=n Receive data with HDLC framing Receive data +FRM=n +FRS=n Receive silence +FTH=n Transmit data with HDLC framing +FTM=n Transmit data +FTS=n Stop transmission and wait Fax Class 2 commands +FCLASS=n Services class. -
Page 128: Voice Commands
+FPHCTO Phase C time out. +FPOLL Indicates polling request. +FPTS: Page transfer status. +FPTS= Page transfer status. +FREV? Identify revision. +FSPT Enable polling. +FTSI: Report the transmit station ID. Voice commands Select Baud Rate #BDR #CID Enable Caller ID detection and reporting format Select Data, Fax or Voice/Audio #CLS #MDL? - Page 129 Attention Switzerland User: If your Swisscom phone line does not have Taxsignal switched OFF, modem function may be impaired. The impairment may be resolved by a filter with the following specifications: Telekom PTT SCR-BE Taximpulssperrfilter-12kHz PTT Art. 444.112.7 Bakom 93.0291.Z.N Appendix C.
- Page 130 User Guide...
-
Page 131: Appendix D. Customer Replaceable Unit (Cru) Parts List
Retainer, cards input/output Battery, 3.0V CMOS battery Control panel assembly Hard disk drive mounting bracket assembly Fan bracket assembly Air duct with/without fan System board shield kit Hard disk drive bracket assembly Hard disk drive tray © Copyright IBM Corp. 2004... - Page 132 User Guide...
-
Page 133: Appendix E. Notices
Web sites. The materials at those Web sites are not part of the materials for this IBM product, and use of those Web sites is at your own risk. -
Page 134: Television Output Notice
Television output notice The following notice applies to models that have the factory-installed television-output feature. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. -
Page 135: Index
5, 27, 51, 61, 77 system 11, 33, 58, 84 installing 15, 37, 62, 88 microphone connector 8, 30, 55, 81 internal 2, 14, 24, 36, 48, 51, 61, 74, 87 removable media 5, 27, 51, 61, 77 © Copyright IBM Corp. 2004... - Page 136 modem Basic AT commands 107 USB connectors 8, 30, 55, 81 Extended AT commands 109 using, security profile by device 100 Fax Class 1 commands 111 Fax Class 2 commands 111 MNP/V.42/V.42bis/V.44 commands 110 Voice commands 112 mouse connector 8, 30, 55, 81 video, subsystem 2, 24, 48, 74 noise level 4, 26, 50, 76 options...
- Page 138 Part Number: 13R9196 Printed in USA (1P) P/N: 13R9196...