Table of Contents
Advertisement
10. Remove the external SCSI cable assembly, located at the I/O port panel at the
11. Remove the adapter retainer bracket assembly (see "Adapter retainer bracket
12. Remove the power supply structure (see "Power-supply structure" on page 78).
13. Reach behind the server and turn the two blue captive thumbscrews to release
82
IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide
9. Remove all adapters and adapter insulators (see "Removing a PCI or PCI-X
adapter" on page 36), making sure to place the adapters on a static-protective
surface.
AC
rear of the server, by pushing up on the latch clip ( 1 ) with a flat-bladed
screwdriver to release the assembly, and then lifting it out of the server.
assembly" on page 77).
the I/O board from the chassis.
AC
1
2
3
4
Advertisement
Table of Contents
